Xytronix Research & Design WebRelay-10 X-WR-10R12-I User Manual page 89

WebRelay-10 Users Manual
This file is read by requesting the syslog.txt file. For example, using the default IP address the following
command would be used:
http://192.168.1.2/syslog.txt
Note: The setup user name and password are required to access this file.
If the TCP port has been changed (not port 80), the port will be required to read the file. For example,
using the default IP address, and port 8000, the log file would be read as follows:
http://192.168.1.2:8000/syslog.txt
To erase the file, use:
http://192.168.1.2/syslog.txt?erase=1
Xytronix Research & Design, Inc.
Appendix D: Log Files (WebRelay-10 Plus™ only)
page 89