Xytronix Research & Design WebRelay-10 X-WR-10R12-I User Manual page 41

WebRelay-10 Users Manual
Use Email Address
If email messages are to be sent out when relays change state, these check boxes specify to which
email addresses the message will be sent. Email addresses specified on the Network setup tab will
be displayed next to each check box. By default, no boxes are checked.
Remote Service/SNMP
When this box (Send State Msg/Trap on Input Change) is checked, SNMP traps and/or State
messages will be sent whenever the relay state changes. Remote Services or SNMP must be
enabled and properly configured for this feature to be effective.
Xytronix Research & Design, Inc.
Installation and Setup
page 41