Xytronix Research & Design WebRelay-10 X-WR-10R12-I User Manual page 44

Installation and Setup
- Send Email on Alarm 1, Alarm 2, and Normal: Email notifications will be sent due to
Alarm 1, Alarm 2, or when normal conditions are regained.
Use Email Address
If email messages are to be sent out based on alarm conditions, these check boxes specify to which
email addresses the message will be sent. Email address specified on the Network setup tab will be
shown next to each check box.
Remote Service/SNMP
This field specifies the action with a remote server due to an alarm condition.
- No Action: No action is taken.
- Send State Msg/Trap: An event string will be sent to the remote server.
For more information regarding the event string or other commands, see Appendix E: External
Server and Remote Services.
The second drop down box specifies the conditions that will cause an alarm trigger. The following
alarm conditions are available:
- Alarm 1: The specified action occurs due to Alarm 1.
- Alarm 2: The specified action occurs due to Alarm 2.
- Alarm 1 or Alarm 2: The specified action occurs due to Alarm 1 or Alarm 2.
page 44
WebRelay-10 Users Manual
Xytronix Research & Design, Inc.