Xytronix Research & Design WebRelay-10 X-WR-10R12-I User Manual page 51

WebRelay-10 Users Manual
Button 2 Label
This text field is used to describe the function of button 2 of the selected extVar. The text also
appears to the right of the corresponding extVar status. Up to 14 characters may be entered here.
By default, this text is OFF with a value of 0.
Status 1 Text
The text in this field specifies the text that will be displayed when the extVar is value 1, with a gray
background. The text also appears in the status column on the Control Page. Up to 14 characters
may be entered here. By default the text is ON.
Status 2 Text
The text in this field specifies the text that will be displayed when the extVar is value 0, with a gray
background. The text also appears in the status column on the Control Page. Note that if the extVar
is any other value than 1 or 0, the value will be displayed in the same column, with a gray
background. Up to 14 characters may be entered here. By default the text is OFF.
Xytronix Research & Design, Inc.
Installation and Setup
page 51