Unpacking The System; Power Cord/Power Connection; Foot Control Cable Assembly Connection; Air Supply Line Connection - DENTSPLY Cavitron PROPHY-JET Directions For Use Manual

5.5 Unpacking the System

Carefully unpack your Cavitron
Prophylaxis System and verify that all components and accessories are
included:
™
1. Cavitron PROPHY-JET
System with water supply line, air supply line, handpiece
and cable connector assembly factory installed.
2. Air filter assembly.
3. Detachable AC Power Cord set.
4. Cavitron ™ JET Air Polishing Insert Nozzle with cleaning
tool.
5. Dual position Foot Control Assembly.
6. JetShield™ Aerosol Reduction Device.
7. Literature Packet.

5.6 Power Cord/Power Connection

• Verify the Power Control ON/OFF rocker switch located
at the left front underside of the System is set to the OFF
position before proceeding.
• Plug the detachable AC cord into the back of the System.
• Plug the 3 prong grounded plug into an approved outlet.
ON/OFF rocker switch
™ ®
PROPHY-JET Air Polishing
®
Air Polishing Prophylaxis
Section 5: Installation Instructions cont'd
5.7 Foot Control Cable Assembly
Connection
Align the Foot Control plug with the receptacle on the back of the
System and push it in until firmly seated.
5.8 Water Supply Line Connection
• Connect the free end of the system's water supply line to
office water supply line or a Cavitron
Dispensing System.
• Inspect all connections to make certain there are no leaks.

5.9 Air Supply Line Connection

• Connect the free end of the system's air supply line to office
air supply line or a Cavitron™ DualSelect
System.
• Inspect all connections to make certain there are no leaks.
®
DualSelect™
™
dispensing
ENGLISH • 5