Parker PGMT-5200 Owner's Manual page 37

TROUBLESHOOTING CHAINSAW ATTACHMENT
PROBLEM POSSIBLE CAUSE
Chain does not move
Insufficient chain lubrication.
or is too tight.
Chain moves while
Idle is set too high.
engine is at idle.
72
SOLUTION
Check oil level in reservoir.
Check oil lines are not blocked.
Adjust the idle setting until the chain stops.
PROBLEM POSSIBLE CAUSE
Poor cutting Clogged blades.
performance. Blades blunt.
Unusual noise from the Insufficient grease in the
cutting head. gearbox assembly.
TROUBLESHOOTING HEDGE TRIMMER ATTACHMENT
SOLUTION
Stop engine. Clean and lubricate blade assembly.
Have the blades serviced or replaced by an authorised service centre.
Stop engine. Add grease to the gearbox before continuing.
73