Before Using The Multi-Tool - Parker PGMT-5200 Owner's Manual

BEFORE USING THE MULTI TOOL
NOTICE
THIS FUEL MUST BE
MIXED WITH 2 STROKE
OIL AT A 40:1 RATIO
(GASOLINE:OIL)
40:1
NOTE: This Multi Tool is not supplied with any fuel or oil within the engine, there is only trace left from testing.
NOTE: The fuel for this machine must be mixed with 2 stroke oil at a 40:1 ratio (Gasoline:Oil)
WARNING! Do not start without adding a 40:1 ratio (Gasoline:Oil) first, failure to do so will damage the engine.
20
1
INSPECT THE MULTI TOOL
Check the Multi Tool is not damaged and all
components are in good working order before use.
Regular periodic inspection is required to ensure the
Brush cutter is suitable for the task.
Before using the Multi Tool a risk assessment should
be carried out respecting the legislation in the country
of use.
NOTICE
THE HUB ON THIS MACHINE
COMES PRE-ASSEMBLED
NOTE: Please follow all instructions carefully when fitting the various cutting attachments
WARNING! Do not start the Multi Tool without making sure the cutting attachments are fitted properly.
BEFORE USING THE MULTI TOOL
2
LOCKING WASHERS
The locking washers may come pre-installed on the
hub of the machine.
The hub in needs assembling in different
configurations to fit the appropriate attachments.
Washer 'A' needs to be installed at all times regardless
of which attachment is fitted to the hub..
21