Menus - Thermoplan Tiger Programming Manual

Menu 
1 Prod Statistics
SL Technician
- Day Counter
Deleted
00-00-00 00:00
-2 Period Counter
Deleted
00-00-00 00:00
-3 Total Counter
Deleted
00-00-00 00:00
Menu 2
2 Learning mode
SL Technician
2 Learning mode
Select Product
Menu 4
4 Product Parameters
4 Cake Thikness
Select Product
4-2 Cake Thikness
x Cappuccino
<- Grinder
04.0 mm
© 2006 by Thermoplan, Subject to change
Technical Manual
In this menu you can read and erase the day, period and total counter.
By pressing the enter key you access the menu.
In menu - you can read and erase the day counter. By pressing the enter key you access the counter. By pressing the
product keys you can read the his counters
(x: Single product / 2x: Double product / Pod: Pod product). By pressing the Stop key you reach again into the counter
back. By pressing the Sop key you can read the individual ones counters of the products totally.
Press and hold the Stop key for 2 seconds to delete the counter.
In menu -2 you can read and erase the period counter. By pressing the enter key you access the counter. By pressing
the product keys you can read the his counters
(x: Single product / 2x: Double product / Pod: Pod product). By pressing the Stop key you reach again into the counter
back. By pressing the Sop key you can read the individual ones counters of the products totally.
Press and hold the Stop key for 2 seconds to delete the counter.
In menu -3 you can read and erase the period counter. By pressing the enter key you access the counter. By pressing
the product keys you can read the his counters
(x: Single product / 2x: Double product / Pod: Pod product). By pressing the Stop key you reach again into the counter
back. By pressing the Sop key you can read the individual ones counters of the products totally.
Press and hold the Stop key for 2 seconds to delete the counter.
In this parameter the output quantities can be adjusted. The user can set the individual water and milk quantities in
this menu.
By pressing the enter key, you access the menu.
Now you can set the water and milk quantities of the several products by pressing the product keys. By pressing the
exit key, the quantity is stored. With a doubleclick on the product key, you can set the double products (if available).
In this menu the parameters for each coffee product can be adjusted separately.
By pressing the enter key, you access the menu.
By pressing the desired product key, all the parameters for this product can be adjusted.
With a doubleclick on the product key, you can set the double products (if available).
In menu 4-2 you can set the cake thickness with the Plus-/Minus levers (distance between mobile and fixed piston
after the pressing).
Example: Cake Thikness
Dry powder removal
Put a paper tray or small receptacle inside the grounds drawer. Doubleclick the enter key to grind the preprogrammed
beans quantity onto the paper. Now you can weigh the powder.
Test product
Press and hold the enter key for 2 seconds to dispense a test product.
By a single press on the enter key you access menu 4-3.
3 - 4 mm =
9 - 2 mm = 4 gramm
Depends on the grinder setting
Tiger REV-8
9 gramm
SECTION 3
9