Thermoplan Tiger Programming Manual page 15

Menu 6
6-4 Operating Mode
Doupble Product
6-6 POD Products
On
6-7 Rinse Key
On
6-8 Grinder Key
On
6-9 Milksort Key
On
6- Mains Voltage
230V
6-3 Water Source
Waternet
6-5 Sens Drip Tray
No
6-6 Numb Grinders
2
6-7 Milk Source
© 2006 by Thermoplan, Subject to change
Technical Manual
In menu 6-4 you can set the operating mode „Double Product".
Double Product: 2 beverages on single products keys possible
In menu 6-6 you can set the POD Products with the Plus-/Minus levers.
On: POD Products active
Off: POD Products closed
In menu 6-7 you can set the Rinse key with the Plus-/Minus levers.
On: Rinse key active
Off: Rinse key closed
In menu 6-8 you can set the Grinder key with the Plus-/Minus levers.
On: Grinder shift key active
Off: Grinder shift key closed
In menu 6-9 you can set the Milksort key with the Plus-/Minus levers.
On: Milk shift key active
Off: Milk shift key closed
In menu 6- you can set the available mains voltage with the Plus-/Minus levers.
230V or 115V.
In menu 6-3 you can set „Water net" (no Water tank in base) or „Tank" (with Water tank in base)
with the Plus-/Minus levers.
In menu 6-5 the later styles of drip trays have a Reed switch installed.
Remark: Note that older styles drip trays do not have a Reed switch. In such cases the Drip Tray option in menu 6-5
must be set to „No".
In Menu 6-6 you can set the amount of grinders.
1 or 2 grinders.
In menu 6-7 you can set the Milk source with the Plus-/Minus levers.
x Internal :
2x Internnal :
x External :
2x External :
x External withaout sensor :
 Milk sort in base
2 Milk sort in base
 Milk sort external with niveau sensor
2 Milk sort external with niveau sensor
 Milk sort external without niveau sensor
Tiger REV-8
SECTION 3
5