Thermoplan Tiger Programming Manual page 17

Menu 7
7 Mach Maintenance
7- Time Date
hh:mm:ss dd-mm-yy
4:40:5 9-06-07
7-2 Language
English
7-3 Temp. Unit
°C
7-5 Grinder Capcty ->
03.50 mm/sec
7-6 <- Grinder Capcty
03.00 mm/sec
7-7 Display Contrast
07
7-9 Serv Intervall
030000 cyclus
7-0 Service Date
dd-mm-yy
22-06-07
7- Coffee Qnty
00.000 kg
7-2 Filter Water
03000 ltr
7-3 Filter Wat. Date
dd-mm-yy
22-06-07
© 2006 by Thermoplan, Subject to change
Technical Manual
In this menu the several machine maintenance parameter can be set.
By pressing the enter key you access the menu.
In menu 7- you can set the time and date. Use the Plus-/Minus levers to adjust the values. Press the enter key to
step to the next value.
In menu 7-2 you can set the desired language with the Plus-/Minus levers.
Language: German / French / English
In menu 7-3 you can set the desired Temperatur unit °C (Celsius) or °F (Farenheit) with the Plus-/Minus levers.
In menu 7-5 you can set the grinder capacity of grinder .
In menu 7-6 you can set the grinder capacity of grinder 2.
In menu 7-7 you can adjust the Display contrast.
In menu 7-9 you can set the service interval with the Plus-/Minus levers.
in menu 7-0 the date shows, when the next service must take place.
In menu 7- you can set the coffee quantity with the Plus-/Minus levers. This menu is used, when a customer has
only an amount of coffee to use (e.g. leased machines).
In menu 7-12 you can set the water filter with the Plus-/Minus levers.
In menu 7-13 the date shows, until when at the latest the filter must be changed.
Tiger REV-8
SECTION 3
7