Example Of A Programming Of The Key 1 - Thermoplan Tiger Programming Manual

Menu 6
6 Machine Function
6- Machine Type
CTM
6-2 Key Selection
Enter key
6-2 Key Selection
Select key

Example of a programming of the Key 1:

.Press a product key for exampel „Coffee".
2. With this Plus-/Minus levers you can set the product of the key .
Mögliche Einstellungen:
x = Single product
2x = Double product
3. With the Stop key you can saved the settings.
4. Repeat the same process for adjust the next products.
6-3 Kbd. Menu Access
As technician
6-4 Operating Mode
© 2006 by Thermoplan, Subject to change
Technical Manual
In this menu you can read and adjust several machine function.
Press the enter key to access the menu.
In menu 6- you can set the machine typ with the Plus-/Minus lever.
C = Coffee
CTM = Coffee Tea Milk
In menu 6-2 you can adjust the key selection as follow:
- Milk coffee product oder Coffe product / - Grind left oder Grind right / - Adjust of the key names.
Im Menü 6-2 you can set the desired key with the Plus-/Minus levers.
Product key
6-2 Key 
Coffee
x Coffee
<- Grinder
Coffee
6-2 Key 
x Coffee
<- Grinder
Coffee
Im Menü 6-3 you can activate the Operator- or the Technician mode.
In the standard-settings are the key combination for the entry in the programming level closed.
For the entry in the programming level are a Tiger Service Master Card necessary.
Note: Mode „As Operator"
Mode „As Technician" =
In menu 6-4 you can set the operating mode
Self-Service: Machine is set to Self-Service mode
Standard: Additionally you can free-switch or cloesed the individual options with the
Menus 6-5 until 6-0.
CT = Coffee Tea
CTS = Coffee Tea Steam
You can set the key selection with the Plus-/Minus levers.
Select the product type
Select the grinders:
<- Grinder
Grinder ->
<-> Grinder = Grinder left/right
Select the product name
= Programming level only for the Operator
Programming level for Technician and Operator
Tiger REV-8
= Grinder left
= Grinder right
SECTION 3
4