Thermoplan Tiger Programming Manual page 8

Menu navigation
By the delivery, the combination of keys are closed.
In order to reach into the programming evel, is a Tiger service master card necessary.
The technician can decide itself, whether he the combination of keys in the menu „6-3 Kbd. Menu Access " would like to free-switch.
Combination of keys for the technican:
Press keys 2, 5 and 6 simultaneously to access the SL Technician Mode.
Key 
Key 7
backwards
(-)
FUNCTION OF „STEP-
In the programming mode you can step with the two levers.
LEVERS"
Step backwards
turn left lever (Steam-/Milk) /4
In the programming mode the Standby/Stop key is used as an exit-key. You always get one step back
FUNCTION-
if you press this key (leaving the menu).
KEYS
The cleaning key is used as an enter-key. By pressing this key you enter the next level (e.g. from menu
„ Product statistics" in submenu „- Powder Cake").
© 2006 by Thermoplan, Subject to change
Technical Manual
Key combination
Key 2
Key 3
Key 8 Key 9
Stop/Exit Mill change
Key
Key
Key 4
Key 0
Levers
Product-Keys
Milk change Cleaning/Enter
Key
turn right lever (neutral) /4
Tiger REV-8
Key 5
Key 6
Key  Key 2
Key
Step forwards
SECTION 3
forwards
(+)
8