1-7. Options; 8 Accessories Supplied - HP 75000 C Series Service Manual

1-6. Instruments
Covered by this
Manual
Instruments covered by this manual are identified by a serial
number prefix listed on the title page. Hewlett-Packard uses a two
part serial number in the form X)(XXAYYYYY,where XMM is the
serial prefix, A is the country of origin (A=USA) and
YYYYY
is the
serial suffix. The serial number prefix identifies a series of
identical instruments. The serial number suffix is assigned
sequentially and is unique
to
each instrument. If the serial number
prefix of your instrument is greater than the one listed on the title
page, a yellow Manual Update supplement will explain how
to
adapt
this manual
to
your instrument. If the serial number prefix of your
instrument is lower than the one listed on the title page, information
contained in Chapter 7 (Manual Changes) will explain how to adapt
this manual to your instrument.
1-7. Options
There are no options currently available for the HP E1426A
Oscilloscope Module.
1-8. Accessories
There are no accessories currently available for the HP E1426A
Supplied
Oscilloscope Module.
1-9.
Equipment
A number of oscilloscope accessories are available for use with
Available
the HP E1426A Oscilloscope, and include:
The HP 10400A Miniature Probe Family
The HP 10002A 50:l Voltage Divider Probe
The HP 10020A Resistive Divider Probe Kit
The HP 1124A Active Divider Probe Kit
For a complete list of oscilloscope accessories currently available,
contact your nearest Hewlett-Packard sales office.
1-1 0. Recommended
Table 1-1 lists the test equipment recommended for testing, adjusting
Test Equipment
and servicing the oscilloscope. Essential requirements for each piece
of test equipment are described in the Critical Specifications column.
Other equipment can be substituted if it meets or exceeds the critical
specifications.
General Information
1-3