Table of Contents
Advertisement
Configuration and Control, cont'd
Accessing the HTML Pages
Another way to operate the switcher is via its factory-installed
HTML pages, which are always available and cannot be erased
or overwritten. The switcher's HTML pages are accessible
through its LAN port, connected via a LAN or WAN, using a
Web browser such as Microsoft
page 2-3 for connection information.
N
N
1.
2.
3.
N
4.
N
5.
6.
SMX System MultiMatrix Switchers
5-4
Also refer to the SMX System MultiMatrix Switchers User's Manual at www.extron.com.
If your Ethernet connection to the matrix switcher is
unstable, try turning off the proxy server in your Web
browser. In Microsoft Internet Explorer, click Tools >
Internet Options > Connections > LAN Settings,
uncheck the Use a proxy server... box, and click OK.
For details on operating the switcher via HTML pages,
refer to the SMX Users Manual, chapter 6, "HTML
Operation".
Start the Web browser program.
Click in the browser's Address field.
Enter the matrix's IP address in the Address field.
192.168.254.254 is the factory-specified address.
Press the keyboard Enter key. The switcher checks to see if
it is password protected.
If the switcher is not password protected, it displays the
HTML start-up page. The switcher is ready for operation
via HTML remote control.
If the switcher is password protected, the switcher
displays the Connect to xx.xx.xxx.xx Password page.
A user name entry is not required.
Enter the appropriate administrator or user password in
the Password field and click OK.
The switcher displays the HTML start-up page. The
switcher is ready for operation via HTML remote control.
Internet Explorer
®
• Configuration and Control
d
. See
on
®
Advertisement
Table of Contents
