Accessing The Html Pages - Extron electronics DTP CrossPoint 84 IPCP Setup Gudie

Accessing the HTML Pages

NOTES:
•
If your Ethernet connection to the matrix switcher is unstable,
try turning off the proxy server in your web browser. In Microsoft
Internet Explorer, click Tools > Internet Options >
Connections > LAN Settings , uncheck the Use a proxy
server ... box, and then click OK .
• For details on operating the switcher via HTML pages, see the
"HTML Operation" section in the DTP CrossPoint 84 IPCP User
Guide.
1. Start the web browser program.
NOTE: For best results, Extron recommends the following
browsers and compatibility mode:
• Microsoft ® Internet Explorer
compatibility mode off
• Mozilla Firefox
®
• Google Chrome
®
• Apple Safari , version 4 or newer
® ®
2. Click in the Address field and enter the IP address.
NOTE: 192.168.254.254 is the factory-specified default value for
this field.
30 DTP CrossPoint 84 IPCP • Remote Control
® , version 8.0 or newer, with
, version 6 or newer
®
, version 9 or newer
®
3. Press the keyboard <Enter> key. The switcher checks whether it is
password-protected.
If the switcher is not password-protected, it checks and
downloads the HTML start-up page. The switcher is ready for
operation via HTML remote control.
If the switcher is password-protected, it downloads the Enter
Network Password dialog box (see figure 17).
Figure 17. Network Password Dialog Box
NOTE: A User name entry is not required.
4.
Enter the appropriate administrator or user password in the
Password field and click OK .
The switcher downloads the HTML start-up page (see figure 18). The
switcher is ready for operation via HTML remote control.
Figure 18. HTML Startup Page
DTP CrossPoint 84 IPCP • Remote Control 31