Starting The Program - Extron electronics SMX System Setup Manual

Starting the program

1.
2.
N
3.
N
SMX System MultiMatrix Switchers
Also refer to the SMX System MultiMatrix Switchers User's Manual at www.extron.com.
Click Start > Programs > Extron Electronics >
SMX Control Program > SMX Control Pgm icon.
The Comm Port Selection window appears.
Choose the comm (serial) port that is connected to the
switcher or IP [LAN].
For a comm port, check the baud rate displayed in the
comm port selection window. To change the baud rate,
click the Baud button, double-click the desired baud rate.
Click OK.
If you selected a comm port in step 2, the SMX Control
Program is ready for operation.
If you selected IP [LAN] in step 2, the IP Connection
window appears.
a. Examine the Matrix IP Address field, which displays
the last Matrix IP address entered and a drop down box
with a list of the most recently used IP addresses.
If listed, select the applicable IP address, or enter the
correct IP address in the field.
192.168.254.254 is the factory-specified default IP address.
b. If the switcher is password protected, enter the
appropriate administrator or user password in the
Password field.
c. Click Connect. The SMX Control Program is ready for
operation.
• Configuration and Control 5-3