Sis Command Tables - Extron electronics SMX System Setup Manual

SIS Command Tables

Command
Output switching by plane
N The & tie command for RGBHV and the % tie command for video can be used interchangeably.
The ! tie command can be used for switching both video signals and audio signals with the same plane address.
Tie input to an output (RGBHV)
Tie input to an output (video)
Tie input to an output (audio)
Tie input to an output (all)
N Commands can be entered back-to-back in a string with no spaces. For example: 1*1*1&001*002*002&001*003*003&001....
The SMX supports 1-, 2-, and 3-digit numeric entries (1*1*1!, 01*02*02&, or 001*003*003%).
The & tie command for RGB and the % tie command for video can be used interchangeably.
The & read tie command for RGB and the % read tie command for video can be used interchangeably.
Tie input to all (RGBHV)
Tie input to all (video)
Tie input to all (audio)
Tie input to all (audio and video)
X@
= Input number
N
X#
= Output number
X2@
= Plane number
ASCII command Response
(host to switcher) (switcher to host)
X2@ X@ X# X2@
* * & Out
X2@ X@ X# X2@
* * % Out
X2@ X@ X# X2@
* * $ Out
X2@ X@ X# X2@
* * ! Out
X2@ X@ X2@
* * & In
X2@ X@ X2@
* * % In
X2@ X@ X2@
* * $ In
X2@ X@ X2@
* * ! In
01 – (maximum number of inputs for your model), 00 = untied
01 – (maximum number of outputs for your model)
00 – 15, 90-99 (virtual plane)
Additional description
X# X@
]
•In •RGB Tie input
X2@
X# X@
]
•In •Vid Tie input
X2@
X# X@
]
•In •Aud Tie input
X2@
X@
X# ]
•In •All Tie input
X2@
X@ ]
•RGB Tie input
X2@
X@ ]
•Vid Tie input
X2@
X@
]
•Aud Tie input
X2@
X@
]
•All Tie input
X2@
, all signals.
X@ X#
to output on plane
for RGB signals.
X@ X#
to output on plane
for video signals.
X@ X#
to output on plane
for audio signals.
X@ X#
to output on plane
for all signals.
X@
to all outputs on plane
for RGB signals.
X@
to all outputs on plane
for video signals.
X@
to all outputs on plane
for audio signals.
X@
to all outputs on plane