Viking 1600-IP Series Product Manual page 7

Dimensions: 330mm x 267mm x 51mm (13" x 10.5" x 2")
Shipping Weight: 3.18 kg (7 lbs.)
Connections: Gel-filled butt connectors
Material: .105" (12 gauge) brushed stainless steel
Mounting: Flush mount in elevator cabs, ATMs, stairwells,
hallways, etc.
Suggested Hardware: (6) #8 x 3/4 flat head phillips sheet
metal type A screws (not included)
0.25
0.25
6.25
13.0
Minimum
12.5
Grade 2
10.5
10.0
3.1 3.8
EMERGENCY
PHONE
Cutout
PUSH FOR
HELP
Braille
VIKING
Label
(6) 0.188 diameter
countersunk holes
E-1600-02-IP
Optional Enhanced Weather Protection (EWP) Available:
The optional EWP products feature foam rubber gaskets
and boots, sealed connections, gel-filled butt connectors, as
well as urethane or thermal plastic potted circuit boards. See
DOD 859.
Note: When mounting outside to rough or uneven surfaces
(brick, stucco, etc.) apply a bead of clear silicone caulking
around the top edge and sides of faceplate.
Note: When European CE compliance is required, mount
onto a metal enclosure.
Red Call
Connected
CALL
CONNECTED
LED
©
Push To
Call Button
7
4.8
4.7
(Side View)
2.0