Viking 1600-IP Series Product Manual page 18

Typical Installation on SIP Based VoIP Phone System
Viking
1600-IP Series
Emergency
Phone
Viking Customer's
supplies Responsibility
* Note: A PoE extender can be used for an additional 100 meters per extender. For longer runs (up to 2 km / 1.2 miles)
a ethernet to fiber media converter can be used.
• IBM compatible personal computer with:
Windows 7, 8 or 10
• Adobe Acrobat Reader 8 or higher
1600-IP Series
• hardware
Download and install the programming software
1. Go to www.vikingelectronics.com and enter E-1600-IP in the search box
2. Click E-1600-IP in the search results
3. Scroll down the page to Downloads, click IP Programming Software
4. Install the programming software by saving or opening the file and then clicking on setup Viking IP
Programming.exe
5. Follow the prompts on your screen to complete software installation
6. To start the Viking IP Programming application, click on the Viking IP Programming icon on your desk
top. The Main screen will appear, allowing the user to program any 1600-IP Series connected to that
LAN.
Note: PC must be connected to the same LAN as the 1600-IP Series.
100m (328 ft) max*
10/100 Mbps
Maximum
Optional
PoE Injector
(If VoIP PBX does
not have PoE)
PC Requirements
PC Programming
SIP VoIP PBX
or
PC with
SIP Server
Software
Optional
Switch / Hub
(Extends range of cable, keeps
1 Gbps network speed for other
equipment on network)
• Available LAN with PoE (class 1, < 4 watts)
• Ethernet cable ( CAT5 min.)
• 1 MB minimum free hard drive space for installation
• 16MB of free physical RAM
18
Internet