Viking 1600-IP Series Product Manual page 13

Optional Enhanced Weather Protection (EWP) Available
Note: This is a E-1600-IP parts kit without chassis.
Shipping Weight: .45 kg (1 lb)
Connections: Gel-filled butt connectors
Speaker
(included)
Screen (included)
(4) 0.335 x 0.177 mounting
slots for #4 or #6 studs
2.37
2.60
Cone
2.10
Dia.
0.827
Mylar Speaker Dimensions
Connect to "INFO" button
(E-1600-52-IP only, requires a
0.75" diameter mounting hole)
Connect to "PUSH FOR HELP" or
"HELP" button (requires a 0.75"
diameter mounting hole)
Clear Spacer Red Retaining
Lens LED Ring
BL-1 grade 2 black
Red call connected LED with mounting hardware
Braille label included
(requires a 0.250" diameter mounting hole).
PUSH FOR
2.20
HELP
VIKING
©
2.40
E-1600-50-IP / E-1600-52-IP
Speaker Gasket
(EWP only)
2.60
2.10
-or-
Black Red
Red
Red
Black
Black
Red (LED anode)
Black (LED cathode)
*Optional Enhanced Weather Protection (EWP): The
optional EWP products feature foam rubber gaskets and
boots, sealed connections, gel-filled butt connectors, as
well as urethane or thermal plastic potted circuit boards.
See DOD 859.
Note: When European CE compliance is required, mount
in a metal enclosure.
(2) 0.10 diameter
mounting holes
.47 .785
Mic Hole
.50
1.0
Panel
(2) 0.156 diameter
mounting holes
Relay Output
Contacts
Gray (N.C.)
Blue (COM)
Yellow (N.O.)
EWP version
is connected and
encapsulated
0.63
(0.67
EWP)
13
Standard Mic Mounting Boot: Glue
or screw directly behind 0.04" - 0.125"
diameter hole in panel.
Note: Mic holes should be near the
bottom of the boot to allow for drainage.
EWP Mic Mounting Boot: Glue
to the back of your panel at an
upward angle (shown left) behind
a 0.10" - 0.25" diameter hole.
3.20
3.50
(3.58
EWP)
1.5
0.15
(0.19
2.0
EWP)
(2.04 EWP)
2.63
(2.71 EWP)
0.60 (0.80 EWP)
maximum
Side View