Viking E-1600-IP Product Manual
Ada compliant voip emergency phones with built-in dialer and digital voice announcer
Hide thumbs
Also See for E-1600-IP:
- Product manual (34 pages) ,
- Product manual (34 pages) ,
- Product manual (34 pages)
Table of Contents
Advertisement
Quick Links
Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
ADA Compliant VoIP Emergency Phones with
Built-In Dialer and Digital Voice Announcer
The 1600-IP Series ADA Compliant VoIP Emergency Phones are designed
to provide quick and reliable handsfree communication for SIP VoIP phone
systems with PoE. All 1600-IP Series phones meet ADA requirements for el-
evator/ emergency telephones, and can be programmed from any Touch Tone
phone or PC on the same LAN. The phones can dial up to 5 programmable
emergency numbers. In addition, the E-1600-20-IP and E-1600-52-IP feature
a second "INFO" button that will dial up to 5 non-emergency numbers.
The 1600-IP Series phones can be programmed to automatically deliver a
digital announcement to identify the location of the emergency call. Alterna-
tively, a DTMF Touch Tone code may also be delivered. A "Call Connected"
LED can be initiated manually or automatically. All programming parameters,
including phone numbers and location numbers, are stored in non-volatile
memory, requiring no batteries. All units are PoE powered.
For outdoor installations where the unit is exposed to precipitation or conden-
sation, select 1600-IP Series phones are available with Enhanced Weather
Protection (EWP). EWP products feature foam rubber gaskets and boots,
sealed connections, gel-filled butt connectors, as well as urethane or thermal
plastic potted circuit boards. For more information, see DOD# 859.
Installation requires the assistance of a Network Administrator / IT Technician.
!
Features
• Self diagnostic reports via email (testing com, mic, speaker & switch)
• Automatic polling and programming software included
• 2 Amp relay contacts for door/gate or SL-2 strobe light control
• SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
• PoE powered (class 1, <4 watts)
• Automatic Noise Canceling (ANC) feature for proper operation in noisy envi-
ronments
• VoIP eliminates the need for "Push to Talk" mode
• Network downloadable firmware
• Meets ADA requirements for Emergency Phones:
- Automatically lights the "Call Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
• Non-volatile digital voice announcer with 28 seconds of voice memory
• Handsfree operation
• Marine grade 316 stainless steel prevents corrosion on the stainless steel models
• Dials up to 5 emergency numbers
• E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency "INFO" numbers
• Cycles through backup phone numbers on busy or no-answer
• Optional Enhanced Weather Protection (EWP), EWP products are designed to
meet IP66 Ingress Protection Rating, see DOD# 859
• Hangs up on busy signal, time-out or touch tone command
• Remotely programmable
• Extended temperature range (-30°F to 130°F)
• 11 different chassis or board only available
• Available in 42" tower phone model E-1600-BLTIPEWP (DOD# 217)
• Optional PB-100 Polling System available (DOD# 232)
• Optional SL-2 or BLK-4-EWP strobe light kit available (DOD# 242/653)
• Optional E-1600A-MK-GNP Pedestal Mounting Kit (DOD# 227)
PRODUCT MANUAL
• Elevators
• Parking ramps/lots
• Emergency pool phones
• ATM machines
• Area of refuge locations
• Medical centers
Power: PoE class 1 (<4 watts)
Dimensions: See Installation and Specifications
Operating Temperature: -34° C to 54° C (-30°F to 130°F)
Humidity - Standard Products: 5% to 95% non-condensing
Humidity - EWP Products: Up to 100%
Audio Codecs: G711u, G711a, G722
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt con-
nectors
E-1600-IP
E-1600-30-IP
E-1600-55-IP
Applications
* Americans with Disabilities Act of 1992 contains federal regu-
lations regarding elevator telephones (Public Law 101-336).
www.vikingelectronics.com
Information: (715) 386-8861
Specifications
1600-IP Series
ADA Compliant VoIP
Emergency Phones
March 27, 2015
E-1600-45-IP
E-1600-60-IP
E-1600-32-IP
E-1600-20-IP
E-1600-53-IP
E-1600-50/52-IP
E-1600-02-IP/E-1600-TP-IPEWP
E-1600-03-IP
E-1600-TP2IPEWP/E-1600-GT-IPEWP
• Lobbies
• Entryways
• Campus emergency stations
• Stadiums
• Convention centers
• Public access areas
E-1600-65-IP
E-1600-22-IP
Advertisement
Table of Contents
Related Manuals for Viking E-1600-IP
Summary of Contents for Viking E-1600-IP
- Page 1 C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S ADA Compliant VoIP Emergency Phones with Built-In Dialer and Digital Voice Announcer The 1600-IP Series ADA Compliant VoIP Emergency Phones are designed E-1600-IP E-1600-45-IP E-1600-60-IP E-1600-65-IP to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE.
- Page 2 Viking VoIP SIP System Compatibility List NOTE: Exclusion from this list means only that compatability has not been verified, it does not mean incompatability. For detailed configuration instructions for certain vendors below, see Configuring Viking VoIP Phone and SIP Servers, DOD# 944. Infrastructure Class...
- Page 3 Model: E-1600-20-IP Description: 1600-IP board (PCB) only kit. HxWxD: 5.0 x 5.0 x 2.25 Can be used to convert any analog Viking Mounting: Flush mount with included rough-in box 1600A-Series phone to a VoIP version (will not fit in a double gang box), or surface mount...
-
Page 4: Features Overview
Output Contacts Connect to Black (included) Help Switch (2A@30VDC / 250VAC max) Optional Strobe Black Light, etc. N.C. (Gray) Info Switch (optional) Viking model White SL-2 shown COM. (Blue) Speaker (not included), White see DOD# 242 - Black N.O. (Yellow) Microphone... - Page 5 Dimensions: 133mm x 102mm x 51mm (5.25” x 4.0” x 2.0”) EMERGENCY Shipping Weight: 1.13 kg (2.5 lbs.) PHONE 3/4" knockout 2.00 Material: .062” (16 gauge) steel Finish: E-1600-IP - Red powder paint, E-1600-45-IP - Yellow powder paint, (Bottom Condensation 5.25 View) E-1600-60/65-IP - Blue powder paint 1.15...
- Page 6 Mounting with Optional VE-5x5: Surface mount to walls, single gang boxes, Shipping Weight: 1 kg (2.12 lbs.) double gang boxes, posts, or to a Viking VE-GNP Gooseneck pedestal (see DOD# 424 Front Panel Material: 14 gauge Marine grade for more information).
- Page 7 Mounting with Optional VE-5x5: Surface mount to walls, Front Panel Material: 14 gauge Marine grade single gang boxes, double gang boxes, posts, or to a Viking VE-GNP Gooseneck 316 brushed stainless steel pedestal (see DOD# 424 for more information).
- Page 8 Note: This is a 1600-IP board (PCB) only kit. This kit can be used to convert EWP products feature foam rubber gaskets and boots, sealed con- any Viking 1600A Series analog emergency phone to a VoIP version. The kit nections, gel-filled butt connectors, as well as urethane or thermal can also be used to replace a damaged board in the field.
- Page 9 CONNECTED 5.125 "Call Connected" LED PUSH FOR Minimum Cutout HELP Grade 2 Braille Label VIKING © Push for "Help" Button ("Info" Button available on model E-1600-TP2-IP-EWP) 2.125 Marine grade 316 stainless steel faceplate and push button switch (sealed per IP67) 0.75...
- Page 10 B. Configuring the 1600-IP Series Network Settings Open the “Viking VoIP Phone Programming” software on a windows PC that is connected to the same LAN as the 1600-IP phone to be Step 1.
- Page 11 C. Manually Resetting All Network Parameters to Factory Default Step 1. Power down the 1600-IP Series phone by disconnecting the RJ45 plug. Step 2. Press and hold the HELP/CALL button, then reconnect the RJ45. Continue to hold the button until you hear 2 beeps, (approximately 6 seconds). Continue to hold the button until you hear 4 more Step 3.
- Page 12 Quick Programming Features (after accessing the Touch Tone Programming Mode) MEMORY DESCRIPTION DIGITS LOCATION First emergency speed dial number 0-20 digits then Second emergency speed dial number 0-20 digits then Third emergency speed dial number 0-20 digits then Fourth emergency speed dial number 0-20 digits then Fifth emergency speed dial number...
-
Page 13: Programming Features
Programming Features Note: Up to 32 digits can be stored in each dial position via touch tone programming, up to 255 characters via PC programming. Touch tone Q and # count as single digits. 1. Speed Dial Numbers (#00 - #09) A. - Page 14 4. Repeat Announcement Option (#15) Touch Repeat Tone Announcement The 1600-IP Series phone can be programmed to play the announcement from 1-9 times, Repeat every 8 seconds or to continuously repeat the announcement every 8 seconds until a Touch Tone Q is detected 1 time* from the distant party.
- Page 15 10. Mic Volume/Automatic Noise Cancelling Mode (#22) The microphone volume can be set from 1 to 9 (1 = lowest volume setting, 9 = the highest, factory set to 5) by entering the single digit then the memory location #22. Alternatively the microphone can be placed in the “ANC” Automatic Noise Cancelling mode by entering 0#22 in programming.
- Page 16 18. “Call Connected” LED Control (#30) The call connected LED on the 1600-IP Series phone can be programmed to: 1 = LED will automatically light when the distant party has answered, this is the factory default setting. 2 = LED will light steady, only after a Touch Tone Q is entered from the called party. 19.
-
Page 17: Operation
You may silence the error beeps per instance by pressing and holding the HELP/CALL button for 5 seconds or by clicking the “Mute Alarm Until Next Failure” button in the Viking VoIP Programming Software (see section A on page 10). The error... -
Page 18: Related Products
The LV-1K can be added to any new or existing Viking 1600-IP Series elevator emer- gency as a single phone stand alone solution. The LV-1K continuously monitors for loss of PoE or communication with the server and will immediately provide an audible and visual indication when the LAN connection has been accidentally cut or disconnected. - Page 19 Viking Area of Refuge Signs Designed to Comply with IBC, ADA, NFPA and ICC Requirements ARS-DLB100 ARS-DRB100 ARS-TB100 ARS-IB100 ARS-LR100 Directional Blue signs with left or Tactile Blue Braille and Instructional Blue Braille and Lighted double sided Wall or ceiling...
-
Page 20: Warranty
TWO YEAR LIMITED WARRANTY Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016.