Copies Data Settings To Other Controller - Mitsubishi LE-40MTB-E Instruction Manual

9.4 Copies data settings to other controller

• All the set data saved in the tension controller except the
external input from the trimmer or others and internal mon-
itor values can be written, read and compared between the
memory cassette FX-EEPROM - 4 (or FX-EEPROM-8).
• By transferring the data from the memory
which the operation constants and parameters in accor-
dance with each material to the tension controller, the unit
can be activated easily at a local site.
1. Storing data on cassette
Read the data from the original controller to copy the settings.
Turn off the power supply . Load the memory
cassette. Before writing on the memory
cassette, turn off the memory protect switch .
M
Turn off the power . Remove or
2. Writing data on cassette
Writes the settings of the original controller on the new controller.
Turn off the power supply. Load the memory
cassette. Turn on the memory protect switch
on the memory cassette.
M
Select " CASS → LE - 40"
Turn off the power. Remove or
Power ON
M . C A S S .
E C A S S E T T E
C A S S → L E - 4 0
:
ENTER
"Completed" is
displayed
replace the memory cassette
Power ON
M . C A S S .
E C A S S E T T E
C A S S → L E - 4 0
:
ENTER
"Completed" is
displayed
replace the memory cassette
cassette in
No control output will be generated
while the memory cassette is loaded .
Select " LE - 40→CASS "
D A T A T R A N S F E R
L E - 4 0 → C A S S
: C A S S = L E - 4 0
If the model name does not agree or the write
protect switch is turned on,"DATA ERROR"
message is displayed.
After completion, switching items by the
or key is not possible .
When executing other operation after completing
this process, turn on the power supply again.
Note that, if the data is transferred from
the cassette to the main system , the data
having been established will disappear.
D A T A T R A N S F E R
L E - 4 0 → C A S S
:
If the model name does not agree or the write
protect switch is turned on,"DATA ERROR"
message is displayed.
After completion, switching items by the
or key is not possible .
This completes copying the data.
Adjust the zero and span and set the password
again before starting the trial operation and
adjustment.
42
C A S S = L E - 4 0
Memory
cassette.