Play Option; Midi; Midi Setting - Boss GT-1000 Parameter Manual

PLAY OPTION

Here you can specify how the pedals will work during performance.
Parameter Value
WAIT
BANK MODE
IMMED
U01–U50
BANK
EXTENT MIN
P01–P50,
U01–U50
BANK
EXTENT MAX
P01–P50,
MONO
PHRASE
LOOP MODE
STEREO
Specifies how the looper operates when you press the pedal.
PHRASE
REC 0 PLAY 0 DUB
LOOP REC
ACTION
REC 0 DUB 0 PLAY
Explanation
Although the indication in the display
is updated to reflect the change in the
bank when a BANK pedal is pressed, the
patch will not change until a number
pedal has been pressed.
The patch switches instantly when a
BANK pedal or any of the number pedals
is pressed.
Sets the lower limit for the banks.
Sets the upper limit for the banks.
Mixes the L/R signals for mono
operation.
The recording time is 38 seconds.
Operate in stereo.
The recording time is 19 seconds.
Operation switches in the order of
record 0 play 0 overdub.
Operation switches in the order of
record 0 overdub 0 play.

MIDI

Here you can make settings for using the GT-1000 connected with an
external MIDI device or with a second GT-1000 unit.
Reference
For more about MIDI, refer to "Connecting External MIDI Devices" in
the owner's manual.

MIDI SETTING

Parameter Value
This sets the MIDI channel used for receiving MIDI messages.
RX CHANNEL
Ch. 1– Ch. 16
This makes the settings for the channels used for MIDI
information.
OMNI MODE OFF
ON
Sets the MIDI channel used for transmitting MIDI messages.
Ch. 1– Ch. 16.
TX CHANNEL
RX
This sets the MIDI Device ID used for transmitting and receiving
Exclusive messages.
DEVICE ID
1–32
This specifies the connector from which to output the MIDI
messages that are received at the MIDI IN connector.
OFF
MIDI OUT
MIDI IN THRU
USB OUT
USB/MIDI
This specifies the connector from which to output the MIDI
messages that are received at the USB port.
OFF
MIDI OUT
USB IN THRU
USB OUT
USB/MIDI
This setting determines the basis used for synchronizing
the timing for effect modulation rates and other time-based
parameters.
* When you have an external MIDI device connected, the
MASTER BPM is then synchronized to the external MIDI
device's tempo, thus disabling the MASTER BPM setting. To
enable setting of the MASTER BPM, set to "INTERNAL. "
* When synchronizing performances to the MIDI Clock signal
from an external MIDI device, timing problems in the
performance may occur due to errors in the MIDI Clock.
AUTO
SYNC CLOCK
INTERNAL
MIDI (AUTO)
USB (AUTO)
MENU
Explanation
Specifies the receive channel.
Information is received on the channel
specified by the RX CHANNEL setting.
Messages are received on all channels,
regardless of the MIDI channel settings.
Specifies the transmit channel.
Transmits on the same channel as the RX
CHANNEL.
Sets the MIDI Device ID.
MIDI messages are not transmitted.
Messages are transmitted from the MIDI
OUT connector.
Messages are transmitted from the USB
port.
Messages are transmitted from the USB
port and the MIDI OUT connector.
MIDI messages are not transmitted.
Messages are transmitted from the MIDI
OUT connector.
Messages are transmitted from the USB
port.
Messages are transmitted from the USB
port and the MIDI OUT connector.
Operations are synchronized to MIDI
clock messages received via MIDI or USB.
However, operations are automatically
synchronized to the GT-1000's internal
clock if the GT-1000, is unable to receive
the external Clock.
Operations are synchronized to the
GT-1000's internal Clock.
Operations are synchronized to the
MIDI Clock received via MIDI. However,
operations are automatically synchronized
to the GT-1000's internal Clock if the GT-1000
is unable to receive the external Clock.
Operations are synchronized to the
USB Clock received via USB. However,
operations are automatically synchronized
to the GT-1000's internal Clock if the GT-1000
is unable to receive the external Clock.
41