Program Map Bank1-Bank4; Bulk Dump - Boss GT-1000 Parameter Manual

MENU
Parameter Value
Specifies whether MIDI clock will be output from the GT-1000.
CLOCK OUT OFF
ON
Specifies whether program change messages received by the
GT-1000, will switch patches according to the settings of the
program change map or will switch patches according to the
default settings.
MAP SELECT
FIX
PROG
Specifies the controller number when transmitting pedal
NUM1 CC#
operations as control change messages.
NUM2 CC#
OFF
NUM3 CC#
NUM4 CC#
NUM5 CC#
BANKDOWN CC#
BANKUP CC#
CTL1 CC#
CTL2 CC#
CTL3 CC#
CC#1–CC#31,
CTL4 CC#
CC#64–CC#95
CTL5 CC#
CTL6 CC#
CTL7 CC#
EXP1 SW CC#
EXP1 CC#
EXP2 CC#
EXP3 CC#
PROGRAM MAP BANK1–BANK4
When switching patches using Program Change messages
transmitted by an external MIDI device, you can freely set the
correspondence between Program Change messages received by the
GT-1000 and the patches to be switched to in the "Program Change
Map. "
Parameter Value
U01-1–U50-5, P01-1–
PC#1–PC#128
P50-5

BULK DUMP

You can use Exclusive messages to provide another GT-1000 with
identical settings, and save effect settings on a MIDI sequencer or
other device.
Parameter Value
SYSTEM
U01-1–U50-5
FROM
TO
STOMPBOX
TEMP
42
Explanation
MIDI clock is not output.
MIDI clock is output.
This deactivates the Program Change Map.
Switches to the patches according to the
default settings.
This activates the Program Change Map.
Switches to the patches according to the
Program Change Map.
Control Change messages are not output.
Pedal operations are transmitted using the
specified controller number.
Explanation
This sets the patch number (U01-1
through P50-5) for the corresponding
Program Change number.
Explanation
System parameter settings
Settings for Patch Number U01-1 through
U50-5
Stomp box settings
Settings for the patch that is currently
selected