Master - Boss GT-1000 Parameter Manual

MASTER

These settings are applied to the overall patch.
Parameter Value Explanation
PATCH LEVEL
0–200 Adjusts the volume of the patch.
Adjusts the BPM value for each patch.
BPM
40–250
* BPM (beats per minute) indicates the number
This sets the key for the FX HARMONIST.
Major
C (Am)–
Minor
KEY
B (G#m)
Major
Minor
By connecting your guitar amp's channel switching jack to the
GT-1000's AMP CONTROL jack, you can then use Amp Control to
switch the amp channel. This combining of the GT-1000 and the
amp channels allows you to get an even wider variety of distortion
sounds.
Since the Amp Control setting is handled as one of the effects
parameters saved to each individual patch, it allows you to switch
guitar amp channels with each patch.
AMP CTL1
AMP CTL2
OFF
ON
You can specify whether the effect sound is
CARRYOVER
OFF, ON
carried-over when you switch patches.
If this is ON, effects that affect the pitch are
BASS MODE
OFF, ON
optimized for bass.
of quarter note beats that occur each minute
Guitar Amplifier
(Channel switching jack)
GT-1000
(AMP CONTROL jack)
Guitar Amplifier
(Channel switching jack)
GT-1000
(AMP CONTROL jack)
Effect
27