In/Out Setting; Input; Main Out, Sub Out - Boss GT-1000 Parameter Manual

MENU

IN/OUT SETTING

INPUT

Adjust the input level according to the output level of the guitar that
you've connected.
Parameter Value
INPUT LEVEL -20–+20dB

MAIN OUT, SUB OUT

Specify the device (amp) that's connected to the MAIN OUTPUT, SUB
OUTPUT jacks.
OUTPUT SELECT
Parameter
AIRD OUTPUT SELECT
Value Explanation
Choose this setting if you're using headphones, or if the
GT-1000 is connected to a keyboard amp, mixer, or digital
LINE/PHONES
recorder.
The speaker type for the preamp is fixed (original).
Choose this setting if you're using headphones, or if the
GT-1000 is connected to a keyboard amp, mixer, or digital
RECORDING
recorder.
This setting lets you freely select the speaker type.
Choose this setting if the GT-1000 is connected to the
JC-120 RETURN
RETURN jack of the Roland JC-120 guitar amp.
Choose this setting if the GT-1000 is connected to the
JC-120 INPUT
guitar input of a JC-120 guitar amp.
Choose this setting if the GT-1000 is connected to the
RETURN jack of the Roland Blues Cube Tour guitar amp.
Blues Cube Tour410
RETURN
This assumes that the connected speaker cabinet is the
Blues Cube Cabinet 410.
Choose this setting if the GT-1000 is connected to the
guitar input of a Roland Blues Cube Tour guitar amp.
Blues Cube Tour410
INPUT
This assumes that the connected speaker cabinet is the
Blues Cube Cabinet 410.
Choose this setting if the GT-1000 is connected to the
Blues Cube Artist212
RETURN jack of the Roland Blues Cube Artist212 guitar
RETURN
amp.
Blues Cube Artist212 Choose this setting if the GT-1000 is connected to the
INPUT guitar input of a Roland Blues Cube Artist212 guitar amp.
Choose this setting if the GT-1000 is connected to the
RETURN jack of the BOSS WAZA Amp Head guitar amp.
WAZA Amp 412
RETURN
This assumes that the connected speaker cabinet is the
WAZA Amp Cabinet 412.
Choose this setting if the GT-1000 is connected to the
guitar input of a BOSS WAZA Amp Head guitar amp.
WAZA Amp 412
INPUT
This assumes that the connected speaker cabinet is the
WAZA Amp Cabinet 412.
Choose this setting if the GT-1000 is connected to the
RETURN jack of the BOSS WAZA Amp Head guitar amp.
WAZA Amp 212
RETURN
This assumes that the connected speaker cabinet is the
WAZA Amp Cabinet 212.
Choose this setting if the GT-1000 is connected to the
guitar input of a BOSS WAZA Amp Head guitar amp.
WAZA Amp 212
INPUT
This assumes that the connected speaker cabinet is the
WAZA Amp Cabinet 412.
KATANA-100/212
Choose this setting if the GT-1000 is connected to the
RETURN RETURN jack of the KATANA-100/212 guitar amp.
KATANA-100/212 Choose this setting if the GT-1000 is connected to the
INPUT guitar input of a KATANA-100/212 guitar amp.
Choose this setting if the GT-1000 is connected to the
KATANA-100 RETURN
RETURN jack of the KATANA-100 guitar amp.
38
Explanation
Adjusts the guitar input level.
Value Explanation
Choose this setting if the GT-1000 is connected to the
KATANA-100 INPUT
guitar input of a KATANA-100 guitar amp.
This setting is for cases other than the above when
TUBE COMBO 212 connecting to the RETURN of a vacuum tube combo
RETURN amp (in which the amp and speakers are in a single unit)
equipped with two 12" speakers.
This setting is for cases other than the above when
TUBE COMBO 212 connecting to the INPUT of a vacuum tube combo amp (in
INPUT which the amp and speakers are in a single unit) equipped
with two 12" speakers.
This setting is for cases other than the above when
TUBE COMBO 112 connecting to the RETURN of a vacuum tube combo
RETURN amp (in which the amp and speakers are in a single unit)
equipped with one 12" speaker.
This setting is for cases other than the above when
TUBE COMBO 112 connecting to the INPUT of a vacuum tube combo amp (in
INPUT which the amp and speakers are in a single unit) equipped
with one 12" speaker.
This setting is for cases other than the above when
connecting to the RETURN of a vacuum tube stack guitar
TUBE STACK 412
amp (in which the amp and speakers are separate units).
RETURN
This assumes that the connected speaker cabinet is
equipped with four 12" speakers.
This setting is for cases other than the above when
connecting to the INPUT of a vacuum tube stack guitar
TUBE STACK 412
amp (in which the amp and speaker are separate units).
INPUT
This assumes that the connected speaker cabinet is
equipped with four 12" speakers.
Choose this setting if the GT-1000 is connected to the
KATANA-50 INPUT
guitar input of a KATANA-50 guitar amp.
Choose this setting if the GT-1000 is connected to the
NEXTONE-Artist
RETURN jack of the NEXTONE-Artist guitar amp.
RETURN
This assumes that the POWER AMP SELECT is set to EL34.
Choose this setting if the GT-1000 is connected to the
NEXTONE-Stage
RETURN jack of the NEXTONE-Stage guitar amp.
RETURN
This assumes that the POWER AMP SELECT is set to EL34.
A setting for the connection to the RETURN jack of the
Fender MUSTANG guitar amp.
MUSTANG 212
RETURN
This assumes that the connected speaker cabinet is
equipped with two 12" speakers.
Hot Rod Deluxe A setting for the connection to the RETURN jack of the
RETURN Fender Hot Rod Deluxe guitar amp.
A setting for the connection to the guitar input of the
Twin Reverb INPUT
Fender Twin Reverb guitar amp.
A setting for the connection to the guitar input of the VOX
AC30 INPUT
AC30 guitar amp.
A setting for the connection to the RETURN jack of the
Marshall JCM2000 guitar amp.
JCM2000 412
RETURN
The connected cabinet is assumed to be a Marshall
cabinet with four 12" speakers.
A setting for the connection to the RETURN jack of the
Marshall JVM410H guitar amp.
JVM410H 412
RETURN
The connected cabinet is assumed to be a Marshall
cabinet with four 12" speakers.
A setting for the connection to the RETURN jack of the
MESA/Boogie Rectifier guitar amp.
Rectifier 412 RETURN
The connected cabinet is assumed to be a MESA/Boogie
cabinet with four 12" speakers.
A setting for the connection to the RETURN jack of the
Hughes & Kettner TriAmp guitar amp.
TriAmp 412 RETURN
The connected cabinet is assumed to be a Hughes &
Kettner cabinet with four 12" speakers.
BASS AMP WITH Use this setting when connecting to a bass amp that has
TWEETER
no tweeter.
BASS AMP NO
Use this setting when connecting to a tweeter-equipped
TWEETER bass amp.
You can use a dedicated tool to download settings from
the Boss website and add them to USER1 and USER2.
USER1, USER2
Download the dedicated tool from the BOSS website.
http://www boss info/support/