XYZ Printing da Vinci Jr. WiFi Pro User Manual page 21

● Function Description :
●
Select "Edit". The software screen shall display the laser engraver settings.
The user may choose between Vector / Pixel engraving modes (default software setting is Vector mode).
Set engraving speed, number of engraving layers, contour detection sensitivity, or color depth detection sensitivity.
● Pause and cancel the laser sculpting
PAUSE:Select "PAUSE" to pause the laser engraving process.
RESUME:To cancel the pause and resume the printing, select "RESUME".A screen will appear to confi rm whether to resume the
engraving process. Select "YES" to continue the laser engraving process.
CANCEL: To cancel the laser engraving job, select "CANCEL". A screen will appear to confirm whether to cancel
the engraving process. Select "YES" to cancel the laser engraving process.
●
Laser Specification
Laser
450nm+5nm/-10nm InGaN
Wavelength
Laser Power for
Class 3B
Classifi cation
Engraving area 15 x 15 cm / 5.9" x 5.9"
Mode of
CW (Continuous Wave)
Operation
For more details on laser engraving settings and methods,
please refer to the "Laser Engraving Module User Manual".
Select "Import" on the device to select the graphic file you wish to engrave.
Once basic editing has been completed, select this "Engrave" icon.
The setting of "Language" and "Automatic Feedback"
(sending the set value of the engraving to XYZprinting).
Engraving samples.
Software version info.
Selective Module
Laser Power 350mW ± 10%
Beam Diameter ≦ 1mm
File Types JPG / PNG / GIF / BMP
da Vinci
Jr. WiFi Pro
P 21