Fujitsu Siemens Computers SPARC Enterprise T5140 Installation Manual page 19

Prompt Notations
The following prompt notations are used in this manual.
Shell
C shell
C shell superuser
Bourne shell and Korn shell
Bourne shell and Korn shell superuser
ILOM service processor
ALOM compatibility shell
™
OpenBoot PROM firmware
Conventions for Alert Messages
This manual uses the following conventions to show alert messages, which are
intended to prevent injury to the user or bystanders as well as property damage, and
important messages that are useful to the user.
Warning – This indicates a hazardous situation that could result in death or serious
personal injury (potential hazard) if the user does not perform the procedure
correctly.
Caution – This indicates a hazardous situation that could result in minor or
moderate personal injury if the user does not perform the procedure correctly. This
signal also indicates that damage to the product or other property may occur if the
user does not perform the procedure correctly.
Caution – This indicates that surfaces are hot and might cause personal injury if
touched. Avoid contact.
Prompt
machine-name%
machine-name#
$
#
->
sc>
ok
Preface xvii