Hold (Abs Is Working) Mode - SSANGYONG Korando 2013 Manual

3) HOLD (ABS is working) Mode

As hydraulic pressure on each wheel increases, the wheel tends to lock. In order to prevent the wheel
from locking, the hydraulic valve modulator operates the inlet valve control solenoid to stop increasing
the hydraulic pressure by closing the inlet valve. At this moment, the outlet valve is closed. This
procedure helps the wheel to maintain a constant hydraulic pressure.
Solenoid valve
Inlet valve - Normal open (NO) valve
Outlet valve - Normal close (NC) valve
Valve Open/Close
Close
Close
11-21
4890-00
Pump motor
OFF