Table of Contents
Advertisement
01-14
2) Function
(1) Function of heater and A/C control assembly with FATC
Temperature control dial
To set the temperature, turn the dial to the left or
right. The LCD display shows the set
temperature.
AUTO switch
When pressing this switch, "AUTO" is shown on
the display and the fan speed and air distribution
mode are adjusted automatically to keep interior
temperature to the set temperature.
ON/OFF switch
Pressing the switch turns the FATC on/off. When
the FATC is turned on, it memorizes the previous
status before becoming off.
Defroster mode switch
This is used to remove the condensation from the
windshield. When you press the switch, the
indicator comes on and the air distribution is
changed to the windshield at the same time, then
the air conditioner starts to operate. When you
press the switch again, the indicator goes off and
the air distribution returns to the previous status.
LCD display
1.
Indoor set temperature indicator
2.
AUTO mode operation indicator
3.
A/C operation indicator
4.
Defrost mode indicator
5.
Fresh air mode indicator
6.
Air recirculation mode indicator
7.
Vent & foot mode indicator
8.
Fan speed indicator
Advertisement
Table of Contents
Troubleshooting
