Warning Lamps - SSANGYONG Korando 2013 Manual

11-10

4. WARNING LAMPS

1. ABS warning lamp
2. Brake warning lamp
(EBD warning lamp: ABS warning lamp + Brake warning lamp)
1) ABS Warning Lamp
ABS warning lamp module indicates the self diagnosis and malfunction.
ABS warning lamp ON:
1. When turning the ignition switch to ON position, ABS warning lamp comes on for 3 seconds for self-
diagnosis and goes off if the system is OK (initialization mode).
2. When the system is defective, the warning lamp comes on.
3. When the self-diagnosis is performing, the warning lamp comes on.
4.
When the HECU connector is disconnected, the warning lamp comes on.
5. ABS is not available during lamp ON. In this condition, Only normal brake system without ABS function
is available.
6.
When the communication between warning lamp CAN module in meter cluster, the warning lamp
comes on.