Special Tool For Tpms System - SSANGYONG Korando 2013 Manual

15-4

2. SPECIAL TOOL FOR TPMS SYSTEM

The following torque wrench and connecting adapter should be prepared when installing the TPMS
wheel module.
When fitting the wheel module, tighten the mounting bolt to the specified tightening torque (1.4 Nm)
to prevent the wheel module from being damaged due to excessive tightening.
Torque wrench
Torque wrench (0.1~5.0 Nm)
E-socket T-10
How to use
To remove and install valve insert
To remove and install valve body
Tire valve changer