Table of Contents
Advertisement
03-110
▶
AUTO hazard warning flasher control
Operation 1.
A.
The hazard warning lamp comes on 3 times (T3) when the AUTO hazard warning lamp switch is
pressed for less than 0.6 seconds (T1).
Operation 2.
B.
The hazard warning lamp comes on 10 times (T4) when the AUTO hazard warning lamp switch is
pressed for 0.6 seconds or more (T2).
C.
The turn signal lamp switch is pressed during the AUTO hazard warning lamp operation.
D.
The corresponding turn signal lamp is activated after this AUTO hazard warning lamp operation.
-
The AUTO hazard warning lamp can be controlled only with IGN ON.
-
The input from the AUTO hazard warning lamp switch is ignored during the turn signal lamp
operation by the turn signal lamp switch.
-
Priority of operation: (Hazard warning lamp switch > LH/RH turn signal lamp > AUTO hazard
warning lamp switch)
Operating process
Advertisement
Table of Contents
Troubleshooting
