Dot Lcd Display Related To Tpms - SSANGYONG Korando 2013 Manual

15-16

1) DOT LCD Display Related to TPMS

▶
Supervision type
Status
Correct tire pressure
Excessive tire pressure
Low tire pressure
Lower than minimum tire
pressure
Sudden tire pressure loss
Imbalance between left and
right tire pressure
Impossible to determine tire
pressure
DOT LCD display Condition & illumination method
The specified tire pressure is based on a
cold tire with the vehicle unloaded (no
occupant); 32 psi at 20℃.
Corresponding status lamp blinks with
reverse shading at interval of 0.4 seconds if
tire pressure is 50 psi or higher
When tire pressure is less than 13~20% of
specified value for a period of time,
corresponding status lamp blinks with
reverse shading for 70 seconds at interval of
0.4 seconds
Corresponding status lamp comes on if tire
pressure is 24 psi or less
Corresponding status lamp blinks with
shading reverse at interval of 0.4 seconds if
tire pressure changes more than 3 psi per 1
minute at speed of 0 km/h or above.
Corresponding status lamps blink
alternately at interval of 1.0 second if tire
pressure differs by more than 4 psi in the left
and right tires while driving for more than 10
minutes
Pressure of the tire displayed as "--" when
not possible to determine tire pressure
correctly
* At initial start, the tire pressure can be
displayed after 10 minutes of driving at
speed of 20 km/h or higher