SSANGYONG Korando 2013 Manual page 1277

1. SPECIFICATIONS
Operating voltage
Operating current (open & close)
At no load
Leakage current
Roof motor operating speed
(at opening and closing)
Motor overload stop conditions
2-step opening amount
Vertical/horizontal tolerance for sunroof glass
panel
2. CAUTIONS
▶
Cautions during work
- Wear a clean work clothes and gloves.
- Any unauthorized modification or operational test is not allowed since the sunroof motor and
control unit are preset at the factory.
- Take care not to drop or stack vertically when removing the sunroof. This may cause the moving
parts to be damaged.
9 ~ 16V
Max. 6 A
Approx. 3 A
Max. 1 mA or less
1.4 ± 0.5 sec./100 mm
Current for 25 A or higher and torque (load) for 7.5
Nm or above
1st step sliding open: 370 ± 5 mm
2nd step sliding open: 450 ± 5 mm
± 2mm
04-3
7340-01