Heated Wire Function For Front And Rear Seats - SSANGYONG Korando 2013 Manual

03-24
(2) Heated wire function for front and rear seats (driver and passenger
seats LO↔HI, rear seats ON↔OFF)
▶
Operating conditions
- IGN ON
- If the engine starts to crank during the seat heated wire signal output, the seat heated wire will not be
operated until the cranking stops.
▶
Operation description
- After the ignition is turned on, the heated wire of the front seat can be operated to the desired
temperature (LO/HI) by pressing the front seat heated wire switch.
- After the ignition is turned on, pressing a rear seat heated wire switch activates the heated wire of the
corresponding seat and pressing the switch again turns off the heated wire operation.
▶
Operating process
- When the front or rear seat heated wire switch is pressed, the power is supplied to the corresponding
front or rear seat heated wire through the switch.
The seat heated wire and ventilation unit is not fitted in a vehicle without seat ventilation function.