Front Seat Heated Wire And Ventilation Operation; Engine Running - SSANGYONG Korando 2013 Manual

5) Front Seat Heated Wire and Ventilation Operation

(1) Heated wire and ventilation functions for front seat (driver seat heated
wire and ventilation - 2 levels, passenger seat heated wire - 2 levels)
▶
Operating conditions
-

Engine running

- If the engine starts to crank during the seat heated wire and ventilation signal output, the seat heated
wire will not be operated until the cranking stops.
▶
Operation description
- After the ignition is turned on, the temperature of the seat can be adjusted in 3 levels (Level 2
→ Level 1 → OFF) with each seat heated wire and ventilation switch. Every time the switch is
pressed, the temperature level goes down by one level. Pressing the switch a third time will turn off
the operation.
▶
Operating process
- When the front seat heated wire and ventilation switch is pressed, the front seat heated wire and
ventilation unit supplies the power to the corresponding seat for heated wire and ventilation operation
through the switch.
The heated wire and ventilation functions cannot be operated at the same time.
03-23
7410-00