Technical data
2
Technical data
2.1
Machine identification
Fig. 2-1: Type label
© ALTENDORF 2007
The type label attached to the machine stand is
used to determine the machine identity and further
important key data.
Meaning of the specified designations
Typ:
Nummer:
Baujahr:
Ø
Sägeblatt min
Ø
Sägeblatt max
Führungsschlitz-
breite des Spaltkeils:
Test symbol
To document that the machine complies with the
basic health and safety requirements as defined in
Appendix I of Guideline 98/37/EWG for modifying
Guideline 89/392/EWG (Machine Guideline) the
machine is identified by the following test symbol:
CE symbol, GS symbol and wood dust test symbol
2
:
Machine designation
Machine-specific identifica-
tion number
Year when machine was
made
Diameter of the smallest
permitted saw blade
Diameter of the largest
permitted saw blade
Diameter of the guide pins
for the riving knife in the
riving knife holder
.