Table of Contents
Advertisement
Table locking
7.5
Table locking
The sliding table lock automatically blocks the slid-
ing table in its end position, so that the items for cut-
ting can be pushed against the mitre fence without
any undesired movement of the easy to move slid-
ing table. The table is unlocked by turning the lever
at the end of the upper carriage by hand.
Fig. 7-3: Locking
With an additional locking adjustment the sliding ta-
ble can be blocked in its center setting with the car-
riage lock.
© ALTENDORF 2007
7.6
Main switch
Before the saw drives are switched on the main
switch must be set to position I.
The main switch is BLACK which means that this
main switch has no EMERGENCY OFF function!
When the main switch is used to turn the machine
off the saw drives stop with no braking!
32
Hide quick links:
Advertisement
Table of Contents
