Steam System; Froth Dispenser/Intake Hose; Cleaning In The Dishwasher - Miele CVA 4075 Technical Information

Technical Information
3.9

Steam System

The appliance has two
preparation of froth/cappuccino or espresso/coffee. The second heat
system can be turned off to save energy during the heating phase e.g. if
froth is not prepared very often.
When the steam system is turned off
the unit must heat up first to produce steam. As long as the coffee system
was not completely turned off, the steam system is on.
The steam system is turned on by default.
3 .10

Froth Dispenser/Intake Hose

Clean the froth dispenser after each use,
blocked with dried milk and hard to clean.
Rinsing does not replace cleaning in the dishw
1. Select "Care".
2. Select "Rinse s
3. Set a glass with water u
The intake hose takes in the water and rinses it.
3 .11

Cleaning in the Dishwasher

To clean the froth dispenser in the dishw
machine. Regular cleaning in the dishwasher is important, so that the
froth dispenser does not clog over time, when milk is not removed duri
rinsing. To avoid dispenser clogging. Regular cleaning is recommended.
All dispenser parts are D/W safe.
heating systems. That allow for independent
ystem".
nder the intake hose and select "OK".
1 Turn the cover above the spout to the left
2 Pull the froth dispenser out of the machine
holding it by the spout and the intake hose.
gure 3-9: CVA4070 Frother Spout Removal
Fi
28
CVA4070 / CVA4075 Coffee Systems
and froth or cappuccino is selected,
otherwise they may become
asher.
asher, take the parts from the
,
ing
ng