IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Please read these instructions carefully to prevent accidents and machine damage. This appliance complies with current safety requirements.
Repairs and other work by unauthorized persons could be dangerous and may void the warranty. Only use Miele original spare parts. Only then can the manufacturer guarantee the safety of this machine. Never open the outer casing of the appliance.
Only use the descaling tablets provided by Miele. Take care to use the correct mixture of water and descaler, otherwise it may cause damage. Depending on the fat content of the coffee, the brew unit may clog.
Front view Touch controls (lowest control "On/Off" button) Display Touch controls (lowest control "Clear" button) Top lighting Door grip Hot water spout Guide to the machine Bottom lighting Plastic drip tray Metal drip tray Coffee dispenser (height adjustable) Froth dispenser (removable for better cleaning) Intake hose (removable together with dispenser)
Guide to the machine Interior view Main switch Cover for ground coffee funnel Funnel for ground coffee Grind control lever Coffee bean container Drip tray with no-spill grid for transport Water tank Brew unit Waste unit...
Touch controls Select a touch control with your fingertip to use the machine. Display To select a menu, select the touch control next to the respective menu point. If more features can be selected under one menu point, the menu has three dots (e.g.
Filling water, beans or ground coffee Before using the coffee system for the first time, clean the appliance. See "Cleaning and Care". Filling the water tank The beans and the water quality is important for a good espresso or coffee. The water tank must be washed and filled with fresh cold drinking water before each day of use.
Filling the beans container Only fill espresso or coffee beans in the beans container. Anything else - including ground coffee - will damage the grinding unit. Caramelized or otherwise pre-treated beans or sugar containing beverages must not be filled into the appliance. It will damage the coffee system.
Making coffee The lines must be rinsed daily before the first use. This will happen automatically if "Rinse automatic" is set to "On" (see "Settings - Rinse Automatic") and the machine is cold. After heating, hot water runs out of the two spouts into the drip tray.
Prewarming cups All beverages should be made in a warm cup, to develop the aroma. The smaller the amount of coffee or espresso and the thicker the cups, the more important it is to prewarm the cups. ^ Set the cup under the hot water spout.
Making coffee Espresso and coffee made from coffee beans ^ Set a cup under the coffee dispenser. The drink is dispensed through both dispensers at the same time. ^ Select "Espresso" or "Coffee". The machine grinds the beans and pre-brews the coffee (if "On" is selected under "Pre-brewing").
Espresso and coffee made from ground coffee After filling the funnel with ground coffee (see "Filling water, beans or ground coffee - Filling ground coffee"), the display shows: Did you fill ground coffee and do you want to prepare it? + No ^ Select "Yes".
Making coffee Cappuccino and milk froth When using for the first time or using after descaling The lines were completely drained before the unit left the factory. They will also be drained when the machine is descaled. Before preparing cappuccino or froth, the lines must be filled with water.
Cappuccino To prepare a cappuccino you need a large ceramic or porcelain cup and a small mug (supplied) of milk. The best milk froth is achieved with cold milk. Only one cup of cappuccino can be prepared at a time because of the milk frothing process.
Adjusting the coffee grinder The finer the coffee beans are ground determines the strength of the coffee and the quality of the crema. To prevent machine damage adjust the coffee grinder one notch at a time and let the beans grind before adjusting another notch.
The coffee system can be customized to suit individual preferences. Language To show the displays in the desired language, select the language before the first use. Preheating + DESCALING + USER PROFILES: STANDARD + SETTINGS F ... ^ Select "Settings" from the main menu during the pre-heating phase or, + back + CARE ...
Settings Clock + back + CARE ... + USER PROFILES ^ Select "Settings". SETTINGS + LANGUAGE F ... GRIND AMOUNT ... ~ + CLOCK + TIMER ... ^ Select "Clock". Setting the time of day ^ Select "Enter Time". ^ Select "+" or "-" with the right touch controls to select the hours.
Timer Setting a timer + back + CARE ... + USER PROFILES ^ Select "Settings". SETTINGS + LANGUAGE F ... GRIND AMOUNT ... ~ + CLOCK + TIMER ... ^ Select "Timer". ^ Select "Setting". Turn on at A specific time of day can be set to turn the machine on, e.g.
Settings Turn off after The machine will turn off automatically to save energy after a programmed period of time. Time periods between 15 minutes and 6 hours can be selected. If the machine is not used after dispensing beverages, it will turn off after the selected time.
Activating a timer + back + CARE ... + USER PROFILES ^ Select "Settings". SETTINGS + LANGUAGE F ... GRIND AMOUNT ... ~ + CLOCK + TIMER ... ^ Select "Timer". The timer function "Turning on at" or "Turning off at" can be activated or deactivated.
Settings Grind amount The grind amount can be set, depending on the coffee type, between 0.2 ounces and 0.5 ounces (6 - 14 grams). The more the coffee is ground the stronger the espresso, coffee or cappuccino will be. The crema is also influenced by the grind amount.
Temperature Five temperatures are available for each beverage, three for hot water. Maximum is the highest temperature, minimum the lowest. Not every coffee type allows high temperatures. Some types react so sensitively that the crema cannot be properly built. ^ Select the User profile, for which you would like to set the temperature.
Settings Steam system The appliance has two heating systems. They allow for independent preparation of froth/cappuccino or espresso/coffee. The second heating system can be turned off to save energy during the heating phase e.g. if froth is not prepared very often. When the steam system is turned off and froth or cappuccino is selected, the unit must heat up first to produce...
Total no. coffees ^ Select "Total no. coffees" to check the number of previously dispensed espresso, coffee and cappuccino. After a few seconds the display switches back to the "Settings" menu or touch "OK". System Lock The coffee system can be locked so that it cannot be used by children or those not familiar with the operating instructions.
Settings Water hardness The hardness of the water used in the coffee system must be determined and programmed into the appliance. The water hardness will determine how frequently the unit must be descaled to maintain the coffee system properly. The machine monitors the volume of water passing through it in conjunction with the hardness of the water and will indicate when descaling is necessary.
User profiles Up to 10 different user profiles can be entered to accommodate different tastes i.e. different grind amounts, temperature, pre-brewing, portion sizes. Creating a user profile ^ Select "Settings" and then "more" twice. ^ Select "User profiles". The upper display line shows which user profile is currently set, if different profiles were already created.
Settings Change name ^ If you would like to change a name, touch "Change name" and then the touch control next to the name to be changed. ^ Type in the name as described in "Creating a user profile" and select "OK".
Display The display contrast and brightness can be adjusted. ^ Select "Settings" and then select "more" three times. SETTINGS + back + DISPLAY + TONE OPTIONS ^ Select "Display". ^ Select "Brightness" or "Contrast" and then the setting. The higher the number the higher the contrast or brightness.
Settings Reset To select the factory defaults select in the submenu to "Reset all" (all settings back to default: timer, rinse automatic, steam system, lighting, System Lock, water hardness, display, last selected coffee type and all standard profile settings), or the "User profiles". If you select one of these options ^ Select "Yes"...
The flavor of the coffee depends on the coffee and quantity of water used. To ensure the machine uses exactly the amount of water to suit your taste and your cups, there is a choice of two serving sizes for espresso/coffee. The fill height can be programmed.
Cleaning and Care Allow the coffee system to cool before cleaning. Danger of burns! Do not clean the unit with a steam cleaner. Never use cleaners containing chlorides, sand, soda or scouring agents. These will damage the surface. To avoid mold of coffee waste, clean the unit regularly.
Water tank Empty the water tank daily and refill before preparing the first drink with fresh, cold tap water. Check if the valve is clean. If the valve has residues on it, the water tank will not connect properly and might leak.
Cleaning and Care Drip tray The trip tray contains a sensor which causes the display to show when the tray is full and needs to be emptied. Clean the drip tray daily. Remove the drip tray after the final rinse when no more water runs from the lines.
Drip catch with metal insert ^ Take out and clean the drip catch and metal plate. Cleaning and Care Bean container The bean container must be cleaned by hand with hot water and liquid dish soap. ^ Pull the bean container out and push the lid back.
Cleaning and Care Coffee dispenser connector A connector between the brew unit and coffee dispenser is located on the inner door. ^ Gently clean the connector regularly with a damp cloth without removing the lubricant for the gasket. ^ Lubricate the gasket once a month with the supplied silicone grease.
Brew unit Manually clean the brew unit weekly. The movable parts are lubricated and the gaskets will get damaged in the dishwasher. ^ Take out the water tank, waste unit and the cover for the ground coffee funnel. ^ Press the light colored button on the brew unit handle, , and turn the handle to the left,...
They are specially developed for the coffee maker to optimize the degreasing. The cleaning tablets can be purchased from Miele. As a reminder the display shows "Cleaning must be started" after 200 cups and then until the machine is cleaned.
Froth dispenser/Intake hose Clean the froth dispenser after each use, otherwise it may become blocked with dried milk and hard to clean. Rinsing does not replace cleaning in the dishwasher. ^ Select "Care". ^ Select "System rinse". ^ Set a glass with water under the intake hose and select "OK".
Cleaning and Care ^ Reassemble the parts as shown. Take care that the raised parts (see arrow) point downwards and, ^ that the marks are lined up. ^ Push the froth dispenser into the machine from below, cover above the spout to the right, Do not use the machine without the froth dispenser installed.
Cleaning and Care Stainless steel surfaces Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner (available from Miele). To help prevent soiling, a conditioner for stainless steel can also be used. Apply sparingly and with even pressure.
They are specially developed for the coffee system to optimize the descaling. The descaling tablets can be purchased from Miele. Other agents may damage the machine and affect the taste of coffee and hot water. The machine could also be damaged.
^ The display will prompt you through the next steps: – to fill the descaling agent into the water tank – take the water tank out – fill the water tank with fresh lukewarm tap water to the mark k. If not filled to the mark, the descaling will be canceled prematurely and incomplete...
The display remains dark. The unit has no power. – See "Settings - Lighting". If not, the light bulb has burnt out. Contact Miele's Technical Service Department. Keep the door closed during the heating phase. Adjust the display contrast / brightness.
See "Settings - Timer - Turning off after". – The unit is locked until the water has cooled. – Call Miele's Technical Service Department. – Plug in the machine. – Change the gasket with a new one (supplied).
– Clean the froth dispenser as described in "Cleaning and Care - Froth dispenser/Intake hose". Turn off the unit immediately. Contact the Miele's Tech. Service. Wait until no sound is heard and refill the coffee bean container. Set the grind control to a finer grind.
The steam heating system is turned off but steam can still dispensed. Steam can be dispensed as long as the steam heating system is heated. Once it has cooled, steam can only be dispensed once the steam system has heated. The coffee dispensing is interrupted.
Frequently asked questions The machine does not rinse when turned on although the automatic rinse feature is set to "On". When the machine is still at a temperature of about 140°F (60°C). The machine will not rinse when it's too hot. The water dispensing stops when programming the serving size.
The brew unit or waste unit could not be pulled from the machine. – The brew unit is not in the basic position. – The door was opened during grinding or brewing. No crema has formed or it is "different". –...
Frequently asked questions "F" messages The message F 10 or F 17 appears in the display. No water is dispensed. The message F 73 shows or "Check brew unit" appears in the display. The brew unit is clogged and cannot reset to the correct position.
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.
Caring for the environment Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele’s Technical Service Department. See back page for contact information. WARNING: THIS APPLIANCE MUST BE...
Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer. A combination with other Miele built in appliances is possible. If the machine is installed in combination with other appliances, it should be installed with a protective base between the appliance and the unit (exception: installation with a built-in plate warmer).
Installation Make sure power is not supplied to the appliance while installation or maintenance work is performed. Disconnect the power supply to the work area by unplugging the unit, tripping the circuit breaker or removing the fuse. The coffee system must be installed into cabinetry before being used.
Installation Adjusting the door hinges The door hinges can be adjusted if the door cannot be opened easily. ^ To adjust the door sideways, screw ^ To adjust the door to the front or back, , turn screw , turn...
Alteration rights reserved / 0409 M.-Nr. 07 194 170 / 03 CVA 4070 For the most updated manual see the Miele web site.