Technical Information
6.1.6
Pre-brewing – Set
Initial requirements
Switch the appliance off.
Accessing
Note
Complete the access within 10 seconds.
1. Touch pad Clear and hold.
2. Touch pad On/Off once.
3. Release pad Clear.
4. Touch pad Clear 5 times and at the 5th time, hold it until the
programming mode appears.
Acknowledgement indicator
The display shows the positions of the programming mode
Programming.
Options
1. Touch pad next to Pre-brewing.
2. Touch pad next to the desired setting.
3. Back (without saving): Touch pad Clear.
Long: 3.0 s pre-brewing.
Normal: 1.5 s pre-brewing.
Without: no pre-brewing.
Factory setting: without.
Save and quit
1. Save and back: Touch pad next to OK.
2. End: Touch pad On/Off.
Quit (without saving)
1. Touch pad On/Off.
CVA4070 / CVA4075 Coffee Systems
102