Installation Instructions CVA 4070 en-CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions.
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele’s Technical Service Department. See back page for contact information. WARNING: THIS APPLIANCE MUST BE...
(exception: installation with a built-in plate warmer). A special display cabinet is also available from your dealer or Miele, as an installation option. Miele appliances can be installed ush or proud. Discuss your installation...
Installation Make sure power is not supplied to the appliance while installation or maintenance work is performed. Disconnect the power supply to the work area by unplugging the unit, tripping the circuit breaker or removing the fuse. The coffee system must be installed into cabinetry before being used.
Installation Adjusting the door hinges The door hinges can be adjusted if the door cannot be opened easily. ^ To adjust the door sideways, a, turn screw a. ^ To adjust the door to the front or back, b, turn screw b.
Alteration rights reserved / 0607 M.-Nr. 06 911 520 / 02 en - USA / CDN CVA 4070 For the most updated manual see the MIele Website.