Operating and installation instructions Built-in coffee machine CVA 4060 To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 06 696 510...
Caring for the environment Disposal of the packing Disposal of your old appliance material or machine The transport and protective packing Electrical and electronic appliances / has been selected from materials which machines often contain materials are environmentally friendly for disposal which, if handled or disposed of and can normally be recycled.
Description of the machine External view a On/Off control b Display c Operating control (with turn and press mechanism) d Upper lighting e Door handle f Hot water spout g Lower lighting h Plastic grille i Drip tray cover j Coffee spouts, height-adjustable k Capuccinatore spout, removable for cleaning l Cappuccinatore suction tube, removable together with the Cappuccinatore spout...
Description of the machine Interior view a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g Water container h Brew unit i Waste container...
Miele EGW 4000-14 or 29 plate warmer. or operation. Connection of any other appliance would damage the machine.
(except when it is carried out by a suitably qualified combined with a Miele built-in plate engineer. warming drawer). Installation work and repairs may only be carried out by suitably qualified and competent persons in Caution.
Do not use coffee beans which Only use the descaling tablets have been treated with anything supplied by Miele and follow the containing caramel, any kind of sugar instructions on the packet carefully. Use or any other substances. Do not put...
Warning and Safety instructions Never swing from or hang anything on the front when it is open as this could damage the machine. In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the machine and its surroundings in a clean condition at all times.
Brief description This machine can be used to prepare If two cups of coffee or espresso are espresso, coffee, cappuccino, milk required at the same time, the control froth and hot water . on the right must be pressed twice briefly.
Brief description To ensure that the flavour can develop fully and be maintained for longer the machine has an additional function to automatically rinse and pre-warm the system when the machine is cold. The same function is used to flush coffee remains out of the system and the spouts after use.
Operating the coffee machine The following notes should help you get to know your coffee machine before starting to use it. Controls Both controls are retracted when the machine is delivered. The machine can only be operated when these controls are released.
Operating the coffee machine Display The option which can be selected or altered appears highlighted in the display. When further options or functions are available for selection, they appear listed beside the option (e.g. Settings ...). Currently selected options and settings are indicated by a tick L next to them.
Operating the coffee machine When you use the machine for the very first time, you will be prompted to select a language. A flag symbol after the text will guide you. EINSTELLUNGEN F #eština SPRACHE F dansk deutsch english ^ Turn the right hand control until the language you want is highlighted.
Adding water, coffee beans or ground coffee Please clean the machine thoroughly before filling the water container and the coffee bean container, (see "Cleaning and care"). Filling the water container The quality of the water plays an important part in the overall quality of the coffee.
Adding water, coffee beans or ground coffee ^ Take off the lid and fill the water container with cold, clean drinking water up to the "Max." mark. A valve at the front of the water container will ensure that water cannot escape. ^ Put the lid back on and replace the container in the machine, pushing it right to the back until it clicks into position.
Adding water, coffee beans or ground coffee Adding ground coffee If you want to use pre-ground coffee, you can add ground coffee to the specially designed coffee chute. To do this: ^ Pull the cover for the coffee chute right out of the machine and open up the lid (1.).
Making coffee Important: the water piping must be rinsed through every day and the machine cleaned thoroughly before the first drink of coffee is prepared. Rinsing will take place automatically if the Automatic rinsing programme option has been set to "On" and the machine is cold. Hot water will run out of both spouts into the drip tray once the machine has heated up.
The smaller the volume of coffee/espresso, the more important it is to pre-warm the cup. If you have not got a Miele plate warmer: ^ Place the cup under the hot water spout. ^ Turn the right hand control to "Hot water" and then press the control.
Making coffee Preparing espresso and coffee from freshly ground beans ^ Place a cup under the coffee spouts. The coffee is always dispensed simultaneously from both spouts. ^ Turn the right hand control to espresso or coffee and then press the control. The machine will now grind the coffee beans, pre-brew the ground coffee (if the programme option "Pre-brewing"...
Making coffee To prepare two cups at the same time ^ Place a cup under each of the coffee spouts. ^ Press twice in quick succession on the right hand control so that 2 Espressos or 2 Coffees appear in the display. The machine will now prepare a second portion of espresso or coffee a few seconds after the first one.
Making coffee The coffee is always dispensed simultaneously from both spouts. ^ Turn the right hand control to espresso or coffee and then press the control. The machine will prepare espresso or coffee, which will then be dispensed from the coffee spouts. Do not open the machine door during the brewing process.
Making coffee Cappuccino and milk froth Using for the first time or after descaling Before the coffee machine leaves the factory, the pipework is completely pumped out. This also happens during the descaling process. For this reason, water must be pumped into the pipework before using the machine to make a cappuccino or to froth milk for the first time or after descaling: ^ Place an empty cup under the Cappuccinatore spout.
Making coffee Cappuccino To prepare a cappuccino you will need a large china or porcelain cup and a jug of milk. Froth is best made from cold, skimmed or semi-skimmed milk (1.5% fat). Because the milk needs to be frothed, only one portion of Cappuccino can be prepared at one time.
Making coffee Frothing milk To froth milk separately, use a cold, stainless steel jug that narrows towards the top. Froth is best made from cold, skimmed or semi-skimmed milk (1.5% fat). ^ Fill the glass jug supplied with cold milk and place it under the Cappuccinatore suction tube.
Setting the coffee grinder A good espresso or coffee with a thick, even crema (froth) depends not only on the quality, pressure and temperature of the water and the quality of the coffee beans, but also on the quantity of beans and how finely they are ground. The crema should have an even colour with dark stripes running through it.
Setting the coffee grinder To alter the grinder setting ^ push the slide control to the left (for finer grinding) or to the right (for coarser grinding). You should be able to feel the notches when moving the slide control. If the slide refuses to move, ^ close the machine and dispense a cup of espresso coffee.
Settings: Customising your machine It is easy to customise your machine to suit your exact requirements. The following settings are available: Language: Czech, Danish, German, English, Spanish, French, Italian, Hungarian, Dutch, Norwegian, Polish, Portuguese, Finish, Swedish, Turkish, Greek and Russian Time of day: You can set either a 24 hour or 12 hour clock, and choose to have the Time of day Display on or off Timer:...
Settings: Customising your machine Factory default: All settings, User profile, Temperatures, Amount of coffee A more detailed explanation of the programme options is given in the individual sections. Selecting a language If you want to change the language used in the display, use the Settings menu and follow the flag symbol.
Settings: Customising your machine Time of day ESPRESSO FROTH COFFEE MAINTENANCE ... CAPPUCCINO STANDARD n ... HOT WATER SETTINGS F ... ^ Turn the right hand control until "Settings" is highlighted. ^ Press the right hand control. SETTINGS F Back A LANGUAGE F ...
Settings: Customising your machine A tick L will appear to show if the Time of day display has been switched on or off. To return to the main menu, turn the right hand control until "Back" is highlighted and then press the control.
Settings: Customising your machine The tick L beside "Off" shows that the machine will not switch on at a specific time of day. To switch the machine on at a specific time of day, ^ Turn the right hand control until the upper option (Set / Change) is highlighted and then press the control.
Settings: Customising your machine SETTINGS F Back A TIMER Switch on at ... Switch off after ... Switch off at ... ^ Turn the right hand control until "Switch on after..." is highlighted and then press the control. SETTINGS F Back A TIMER 1:00 / Change L...
Settings: Customising your machine To switch the machine off at a specific time of day, ^ Turn the right hand control until the upper option (Set / Change) is highlighted and then press the control. ^ Set the time you want the machine to switch off at by turning the right hand control and then pressing it.
Settings: Customising your machine Select the User profile for which you want to set the amount of coffee and ESPRESSO FROTH COFFEE MAINTENANCE ... CAPPUCCINO STANDARD n ... HOT WATER SETTINGS F ... ^ Turn the right hand control until "Settings" is highlighted. ^ Press the right hand control.
Settings: Customising your machine When the pre-brewing function is switched off, the hot water is forced through the coffee immediately. Select the User profile for which you want to set the pre-brewing function and ESPRESSO FROTH COFFEE MAINTENANCE ... CAPPUCCINO STANDARD n ...
Settings: Customising your machine Select the User profile for which you want to set the temperature of the drinks and ESPRESSO FROTH COFFEE MAINTENANCE ... CAPPUCCINO STANDARD n ... HOT WATER SETTINGS F ... ^ Turn the right hand control until "Settings" is highlighted and then press the control.
Settings: Customising your machine The machine is delivered with the Automatic rinsing option set to "On". To switch off Automatic rinsing, ESPRESSO FROTH COFFEE MAINTENANCE ... CAPPUCCINO STANDARD n ... HOT WATER SETTINGS F ... ^ Turn the right hand control to "Settings" and then press the right hand control.
Settings: Customising your machine The machine is delivered with the steam system set to On. To switch off the steam system, ESPRESSO FROTH COFFEE MAINTENANCE ... CAPPUCCINO STANDARD n ... HOT WATER SETTINGS F ... ^ Turn the right hand control until "Settings" is highlighted and then press the control.
Settings: Customising your machine SETTINGS F TEMPERATURE ... AUTOMATIC RINSING ... STEAM SYSTEM ... LIGHTING ... ^ Turn the right hand control until "Lighting" is highlighted and then press the control. A tick L will appear beside the lighting option which is currently selected.
Settings: Customising your machine Lighting (with the machine switched off) 14:18 Lighting Time of day "Lighting" in the initial menu (which is only visible if the time of day display has been set) allows you to select the type of lighting for when the machine is switched off.
Settings: Customising your machine System lock The machine can be locked to ensure that it is not operated by unsupervised children or persons who are unacquainted with the operating instructions. Before you can activate the system lock you must first do the following via the Settings menu: ESPRESSO FROTH...
Settings: Customising your machine The machine is now locked and cannot dispense. A closed lock symbol X will appear in the display. To deactivate the system lock ^ Turn the right hand control until the X symbol is highlighted and then press the right hand control. ^ Turn the right hand control to "Off"...
Settings: Customising your machine ^ Dip the strip in your drinking water for approximately a second, then shake off any excess water. The result will be evident after about a minute. If the water is harder than 40 °d / 7.0 mmol/l, limescale will build up more rapidy than with soft water.
Settings: Customising your machine ^ Turn the right hand control until the water hardness level you want is highlighted and press the control. Setting a User profile To cater for different tastes and preferences, you can enter up to 10 individual user profiles and also allocate different settings for amount of coffee, temperature, pre-brewing and portion size to them later (see "Setting the portion sizes").
Settings: Customising your machine USER PROFILE Save as: ....ABCDEFGHIJKLMNOPQRSTUVWXYZ_ 0123456789 Back A Delete OK ^ Turn the right hand control until the first letter or the first number is highlighted and then press the control. ^ Repeat this step until the name you want for the new User profile appears in the display beside "Save as:"...
Settings: Customising your machine Reset You can programme the machine so that it always reverts to the Standard profile or so that it continues to operate using a User profile you have set. To set the profile to be used: SETTINGS F STANDARD L USER PROFILE...
Settings: Customising your machine Or, if you have just switched the machine on, Heating-up phase - do not open the door Descale Settings F ^ Turn the right hand control until n is highlighted and then press the control. ^ Select the User profile you want be pressing the right hand control.
Settings: Customising your machine Plate warmer You can connect a Miele EGW 4000-14 or EGW 4000-29 plate warmer to the coffee machine using a special connection cable available as an optional accessory from your Miele Dealer or the Miele Spare Parts Department.
Settings: Customising your machine The plate warmer will not switch on because the coffee machine is not supplying it with any electricity. The coffee machine is delivered with "Off" as the default setting. Factory default Selecting "Factory default" with the right hand control and then pressing the control will take you into the sub-menu.
Setting the portion sizes The flavour of the coffee produced depends on the type of coffee, the amount of coffee used, how finely the beans are ground and particularly, the quantity of water used. Not all cups are the same size. To ensure the machine uses the right amount of water to suit your taste and your cups, you can programme in the amount to be used.
Setting the portion sizes If you do not stop the flow of water whilst setting the amount, the flow will stop automatically when it has reached the maximum amount possible. This amount is then memorised for the drink.
Cleaning and care Always allow the machine to cool down before cleaning. Danger of scalding. Do not clean the machine with a steam cleaner as this will damage the machine. Never use cleaners containing chlorides, acids, soda or scouring agents. These would damage the surface. It is important to clean the machine regularly, as the used coffee grounds will soon go mouldy.
Cleaning and care Water container Empty the water container daily and fill with fresh, cold drinking water just before use. When cleaning, make sure that there is no soiling in the area around the valve. Otherwise the container will not sit correctly and this could result in water leaking from the machine.
Cleaning and care ^ Also clean the now accessible area in the machine where the waste container sits, thoroughly. ^ Push the waste container fully back into the machine. Drip tray There is a sensor in the drip tray which causes a message to appear in the display when the drip tray is full and needs to be emptied.
Cleaning and care Grille with drip tray cover ^ Take the grille and drip tray cover out and wash them. Coffee bean container The coffee bean container must be cleaned by hand with hot water and a little washing-up liquid. ^ Take the coffee bean container right out of the machine and then push the lid back to remove it.
Cleaning and care ^ Lubricate the seal at least once a month with the grease supplied. Interior and machine door ^ First take out all removable parts and then clean the interior and the machine door with a mild solution of hot water and washing-up liquid.
Cleaning and care ^ Press the light coloured button under the handle of the brew unit a and whilst doing so turn the handle in the direction of the arrow b. ^ Press the catch in front of the brew unit c downwards and pull the brew unit carefully out of the machine.
These have been specially formulated for use in this coffee machine and are available from your Miele Dealer or from the Miele Spare Parts Department. To remind you to degrease the brew unit, the message "Please run the cleaning programme"...
Cleaning and care MAINTENANCE Back A RINSE CAPPUCCINATORE RINSE SYSTEM CLEANING ^ Turn the right hand control until "Cleaning" is highlighted and then press the control. Various messages will now appear in the display. Please follow the prompts. So that you do not have to empty the drip tray too frequently, place a container which can hold approx.
Cleaning and care When Cleaning programme finished appears in the display, the brew unit has now been cleaned of all residues and cleaning agents. ^ Press the right hand control. The Maintenance menu will appear. MAINTENANCE Back A RINSE CAPPUCCINATORE RINSE SYSTEM CLEANING ^ Turn the right hand control until "Back"...
Cleaning and care Thorough cleaning in the dishwasher The Cappuccinatore needs to be cleaned thoroughly. To do this, remove the parts from the machine and clean them in the dishwasher. It is very important to do this regularly to avoid the Cappuccinatore becoming blocked over time with dried on milk residues which are not removed by the normal rinsing cycle.
Cleaning and care Make absolutely sure that none of the small holes in the parts are blocked (see arrow). You can knead the soft parts to unblock them. This is important for trouble-free operation of the machine. On no account use a needle as this would damage the parts.
Make sure that no water penetrates behind the displays or the controls. E-Cloth A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals.
- stainless steel surfaces and - stainless steel coloured controls Stainless steel surfaces Stainless steel surfaces can be cleaned using a Miele E-Cloth or with a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel. N.B. Do not use stainless steel cleaning agents on the controls.
You should only use the descaling tablets supplied with the machine. These have been specially formulated for use in this coffee machine and are available from your Miele dealer or the Miele Spare Parts Department. Other types of descaling agents will damage the machine and affect the taste.
Descaling the machine To run the descaling programme Please fill with fresh water Descale Settings F ^ If you want to descale the machine before it has heated up, use the right hand control to select "Descale" from the initial menu and then press the right hand control to begin the descaling programme.
Descaling the machine Add 2 descaling tablets to the water. Allow the tablets to dissolve fully before shutting the lid and putting the water container back in the machine. ^ Fit the descaling funnels under the spouts as illustrated. The bottom of the funnel fits into the drip tray to enable the descaling agent to be collected in it.
^ Is the machine locked? ^ Has the lighting been switched off (see "Settings, Lighting"). ^ If not, then the lighting is defective. Call the Miele Service Department..the heating-up phase takes too long. If the door is opened during the heating-up phase, e.g. to fill the water container, the heating elements switch off.
There could be stones in amongst the coffee beans. If this is the case, the machine will switch itself off automatically within 20 seconds to avoid damage. - Call the Miele Service Dept. ^ Is the plug correctly fitted in the socket? . . . the lighting suddenly switches itself off.
There could be stones in amongst the coffee beans. ^ Switch the machine off immediately. ^ Contact the Miele Service Department..the coffee grinder makes less noise than usual. The coffee bean container is empty. A message will soon appear in the display.
Problem solving guide ^ Select a slightly coarser coffee grinder setting or a lower setting for the amount of coffee to be ground..the machine door will not close. ^ Are the containers in position correctly? . . . the steam system is switched off but steam is still available.
If the slide control for the grinder is set to very fine, too much residual "coffee water" can be left in the waste container. ^ If a very fine grinder setting has not been set, call the Miele Service Department.
Problem solving guide . . . the heating-up time is getting longer, the amount of water coming through is incorrect and the machine is not performing properly. The machine needs descaling..no water comes out of the spouts. The filters in the brew unit are dirty.
If this fault message still continues to appear in the display, repeat the steps described above. If, despite this, the fault message still appears in the display, call the Miele Service Department..the seal on the connection between the coffee outlet and the brew unit is damaged and is leaking.
(see "Cleaning and Care - Brew unit"). ^ Place the brew unit back in the machine and close the door. If the error message appears again please call the Miele Service Department..the ground coffee chute cover cannot be pushed in properly.
In the event of a fault which you cannot correct yourself, please contact: – your Miele Dealer – the Miele Service Department (see back cover for address). When contacting your Dealer or the Service Department, please quote the model and serial number of your machine.
Electrical connection U.K., ZA, IRL All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
Electrical connection U.K., ZA, IRL Non-rewireable plugs BS 1363 The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).
It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a Miele built-in plate warming drawer).
(available as an optional accessory from your Miele Dealer or the Miele Spare Parts Department) so that it can be in use or ready for use whenever the coffee machine is being used.
Installation Installation Before installation make sure that there is no power supply to the machine. This also applies should it ever need to be taken out of its housing unit. The machine must be built in before it is operated. Two allen keys (size 3 and 5) are required for installation.
Installation – Take the machine out of the niche and drill ø 4.5 mm holes, 2 mm deep where you made the indentations. ^ Connect the machine to the electricity supply. ^ Push it all the way into the niche until you feel resistance. ^ Open the machine door and partially tighten the side socket screws.
Installation Adjusting the door hinges If the machine door becomes difficult to open or close after installation you can adjust the hinges to realign it: ^ To adjust the door in direction a, turn screw a. ^ To adjust the door forwards or backwards, (direction b), turn screw b.
Alteration rights reserved / 0207 M.-Nr. 06 696 510 / 03 en - GB CVA 4060...