How To Read This Design Guide; Copyright, Limitation Of Liability And Revision Rights; Symbols - Danfoss VLT AQUA Drive Series Design Manual

page of 204

/ 204
Contents
Table of Contents
Bookmarks

Table of Contents

VLT

AQUA Drive Design Guide

1 How to Read this Design Guide

1.1.1 Copyright, Limitation of Liability and Revision Rights

This publication contains information proprietary to Danfoss. By accepting and using this manual the user agrees that the information contained herein

will be used solely for operating equipment from Danfoss or equipment from other vendors provided that such equipment is intended for communication

with Danfoss equipment over a serial communication link. This publication is protected under the Copyright laws of Denmark and most other countries.

Danfoss does not warrant that a software program produced according to the guidelines provided in this manual will function properly in every physical,

hardware or software environment.

Although Danfoss has tested and reviewed the documentation within this manual, Danfoss makes no warranty or representation, neither expressed nor

implied, with respect to this documentation, including its quality, performance, or fitness for a particular purpose.

In no event shall Danfoss be liable for direct, indirect, special, incidental, or consequential damages arising out of the use, or the inability to use information

contained in this manual, even if advised of the possibility of such damages. In particular, Danfoss is not responsible for any costs, including but not

limited to those incurred as a result of lost profits or revenue, loss or damage of equipment, loss of computer programs, loss of data, the costs to substitute

these, or any claims by third parties.

Danfoss reserves the right to revise this publication at any time and to make changes to its contents without prior notice or any obligation to notify former

or present users of such revisions or changes.

1.1.2 Available Literature for VLT

VLT

AQUA Drive Operating Instructions MG.20.Mx.yy provide the neccessary information for getting the drive up and running.

VLT

AQUA Drive High Power Operating Instructions MG.20.Px.yy provide the neccessary information for getting the HP drive up and running.

VLT

AQUA Drive Design Guide MG.20.Nx.yy entails all technical information about the drive and customer design and applications.

VLT

AQUA Drive Programming Guide MN.20.Ox.yy provides information on how to programme and includes complete parameter descriptions.

VLT

AQUA Drive FC 200 Profibus MG.33.Cx.yy