Grounding The Housing To The Wall-Bracket - Pepperl+Fuchs VisuNet GXP Series System Manual

VisuNet GXP RM-GXP1100 and RM-GXP1200
Electrical Installation
4.2

Grounding the Housing to the Wall-Bracket

Grounding the AG-XX00 Housing to WALL-BRACKET-XX00-*
1. Ground the wall bracket with the grounding bolt on the bottom of the WALL-BRACKET-
XX00-*.
2. Fasten the screw with a torque of 6 Nm.
Note!
The AG-XX00 housing is grounded indirectly via the wall bracket. It does not require an
additional PE wire between housing and wall bracket.
31