VisuNet GXP RM-GXP1100 and RM-GXP1200
Mechanical Installation
1. While manually securing the housing (e.g. by holding on to it), remove all screws from its
back.
2. While manually securing the housing (e.g. by holding on to it), slowly pull on both lower
corners of the display bezel until the display slides out of the housing completely.
3. While manually securing the housing (e.g. by holding on to it), slide the display panel
about 8 mm to the left to unlock the panel mechanism securing the display.
4. While manually securing the housing (e.g. by holding on to it), open the housing by
moving the display away from it.
15