Pepperl+Fuchs VisuNet GXP Series System Manual page 20

VisuNet GXP RM-GXP1100 and RM-GXP1200
Mechanical Installation
5. Press the scanner holder against the housing from the outside and fasten the screw using a
torque of 6 Nm.
6. Use the hex key to put the second screw (with lock washer and sealing washer) through the
drilled hole at the right side of the AG-XX00 housing and fasten the screw using a torque of
6 Nm.
The scanner holder is now fixed to the housing.
21