Grounding The Housing To The Pedestal - Pepperl+Fuchs VisuNet GXP Series System Manual

VisuNet GXP RM-GXP1100 and RM-GXP1200
Electrical Installation
4.1

Grounding the Housing to the Pedestal

Grounding the AG-XX00 Housing to PEDESTAL-XX00-*.
1. Connect the pre-installed PE wire of the pedestal to the grounding bolt of the AG-XX00 hous-
ing.
2. Ground the pedestal with the grounding stud on the bottom plate of PEDESTAL-XX00-*.
3. Fasten the screw with a torque of 7.5 Nm.
Figure 4.1
1 Housing
2 Ground bolt (hexagon socket)
3 Contact washer
4 Nut
5 Cable lug
6 Flat washer
7 Spring washer
8 Nut
30
Grounding Concept
1
2
3
4
5
6
7
8