Mounting The Scanner Holder To The Housing - Pepperl+Fuchs VisuNet GXP Series System Manual

VisuNet GXP RM-GXP1100 and RM-GXP1200
Mechanical Installation
3.2.5

Mounting the Scanner Holder to the Housing

The SCANNER-HOLDER-PSCAN-XX00-N0 (#548121) is a scanner holder for the PSCAN-*
scanner family that is compatible with the VisuNet GXP housing AG-XX00.
We recommend using the following tools for the installation:
Split socket pliers
Gloves
Hex key drivers (2.5 mm and 3 mm)
Flat wrench (10 mm)
Mounting SCANNER-HOLDER-PSCAN-XX00-N0 to Housing AG-XX00
1. Open the housing.
2. Remove the cover plate on the right side of the AG-XX00 housing by opening the wing
screw which is located within the housing.
3. Affix the scanner holder with the first screw that is contained in the scope of delivery of the
scanner holder.
4. Use a hex key to put the first screw (with lock washer and sealing washer) through the
drilled hole at the left side of the AG-XX00 housing.
20